SMW200A_specs_en_3606-8037-22_v2700.pdf - 第62页

Version 27.00, October 2024 62 Rohde & Schwar z R&S ® SMW200A Vec tor Signal Generator Agile sequencing ( R&S ® SMW-K50 6 option) Agile sequencing allows external control and fast arb itrary switching of pres…

Version 27.00, October 2024

Rohde & Schwarz R&S

SMW200A Vector Signal Generator 61

Time parameters

Maximum play time

variant no. 1

2 h

variant no. 2

521 h

Minimum pulse width

real-time

3.3 ns

I/Q segment

417 ps

Minimum PRI real-time signals

variant no. 1

with R&S

SMW-K503 option

1 µs

with R&S

SMW-K504 option

0.5 µs

variant no. 2

with R&S

SMW-K503 option

1 µs

with R&S

SMW-K504 option

0.5 µs without extension fields,

1 µs with extension fields

Minimum I/Q segment playback

repetition interval

1.0 µs

Real-time MOP types

Unmod

rectangular pulse

Linear FM

up, down, triangular

Maximum hirp deviation

±1 GHz

Phase

Barker

Barker codes

R3, R4a, R4b, R5, R7, R11, R13

Marker signals

Number of marker signals

Operating modes

pulse, restart, PDW

Marker outputs

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Marker delay

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Interface parameters

LAN interface

Connector

ADV DATA/CTRL 1, 2 on rear panel

RJ-45

PDW buffer

Size

536 870 656 byte

Pulse-on-pulse simulation (R&S

SMW-K315 option)

This option enhances the R&S

SMW-K502 option to simulate up to 6 true parallel instances of the extended sequencer in a single

instrument. It allows the generation of time overlapping pulse-on-pulse signals. As a result, up to 6 emitters can be generated

simultaneously in one R&S

SMW200A. If the R&S

SMW-K306 option is installed, each extended sequencer can also be used to

generate a group of interleaved emitters. In case of interleaving emitters, drop-out rates can be reduced by distributing emitters onto

more hardware resources.

Two R&S

SMW-B9 options (wideband baseband generator), two R&S

SMW-K502 options and at least two R&S

SMW-B15 options

(fading simulator and signal processor) must be installed. Depending on the operating mode, additional options are required:

Operating modes

radar signal generation with

R&S

Pulse Sequencer Software

pulse sequencer

radar signal generation using PDW

streaming with R&S

SMW-K503/-K504

options

real-time control interface

Minimum required options

operating mode: pulse sequencer

two R&S

SMW-B9, two R&S

SMW-K502,

two R&S

SMW-K300,

two R&S

SMW-K301,

two or four R&S

SMW-B15

operating mode: real-time control

interface

two R&S

SMW-B9, two R&S

SMW-K502,

two R&S

SMW-K503,

two or four R&S

SMW-B15

Number of extended sequencers

two R&S

SMW-B15 installed

four R&S

SMW-B15 installed

Version 27.00, October 2024

62 Rohde & Schwarz R&S

SMW200A Vector Signal Generator

Agile sequencing (R&S

SMW-K506 option)

Agile sequencing allows external control and fast arbitrary switching of prestored ARB segments by streaming of ARB descriptor

words (ADW) including a waveform ID to the R&S

SMW200A. The R&S

SMW-K506 option enhances the R&S

SMW-B9 wideband

baseband generator option by adding ADW streaming via a dedicated, low latency 10 Gbit/s LAN interface over an existing QSFP+

interface.

In addition to ARB segment sequencing, the interface provides agile switching of frequency, phase and amplitude. These variations

are applied in real time.

At least one R&S

SMW-B9 wideband baseband generator option must be installed. If two R&S

SMW-B9 options are installed (signal

paths A and B), the agile sequencing can be used either on signal path A or B with one R&S

SMW-K506 option. For simultaneous

usage on signal paths A and B, two R&S

SMW-K506 options must be installed.

ADW parameters

ADW format

Size

32 byte fixed length

Controllable parameters

frequency offset, amplitude offset, phase

offset, waveform ID, segment repetitions,

segment interrupt

Setting granularity

Amplitude offset

16 bit (voltage based)

Phase offset

< 0.01°

Frequency offset

0.58 Hz

ARB segments

Maximum individual segments

16 777 216

Length granularity

32 samples

Time parameters

Minimum ARB segment playback

repetition interval

1.0 µs

Operating modes

Deterministic

ADW execution on external trigger event

Trigger to RF delay

depends on ARB sample rate

sample rate = 37.5 MHz

5.6 µs (meas.)

sample rate = 75 MHz

4.1 µs (meas.)

sample rate = 300 MHz

3.4 µs (meas.)

sample rate = 2.4 GHz

3.1 µs (meas.)

Trigger jitter

±1.67 ns

ARB segment repetitions

looping of ARB segments

1 to 2

Instant

instant ADW execution after reception

ADW reception to RF delay

depends on ARB sample rate

sample rate = 37.5 MHz

7.3 µs (meas.)

sample rate = 75 MHz

5.5 µs (meas.)

sample rate = 300 MHz

4.7 µs (meas.)

sample rate = 2.4 GHz

4.3 µs (meas.)

ARB segment repetitions

looping of ARB segments

1 to 2

Marker signals

Number of marker signals

Operating modes

pulse, restart, ADW

Marker outputs

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Marker delay

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Interface parameters

LAN interface

Connector

HS/DIGIQ 1, 2 on rear panel

QSFP+ (note the extras below)

Protocol

UDP over Ethernet

Data rate

10 Gbit/s

Trigger input connector

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Ready for trigger output connector

see section Wideband baseband

generator (R&S

SMW-B9 option) –

arbitrary waveform mode

Internal ADW buffer

Size

512 ADWs

Version 27.00, October 2024

Rohde & Schwarz R&S

SMW200A Vector Signal Generator 63

Mandatory extra

40G QSFP+ to 10G SFP+ adapter

converter module

Recommended extras

• 10G SFP+ optical cable

• 10G SFP+ Ethernet network interface

card

Wideband baseband generator (R&S

SMW-B9 option) – real-time operation

(custom digital modulation)

See Digital Standards for Signal Generators specifications (PD 5213.9434.22).

Wideband baseband generator for GNSS with high dynamics

(R&S

SMW-B9F option)

This wideband baseband generator enables high dynamics with GNSS standards. For details see the GNSS simulation for

Rohde & Schwarz vector signal generators specifications (PD 3607.6896.22). Otherwise, the specifications of the wideband baseband

generator (R&S

SMW-B9 option) also apply for the R&S

SMW-B9F option. Enhancements of the R&S

SMW-B9 option and software

options that run on the R&S

SMW-B9 option also work with the R&S

SMW-B9F option.

Note that R&S

SMW-B9F and R&S

SMW-B9 cannot be mixed, i.e. only the following configurations can be installed:

• 1 × R&S

SMW-B9

• 2 × R&S

SMW-B9

• 1 × R&S

SMW-B9F

• 2 × R&S

SMW-B9F