SMW200A_specs_en_3606-8037-22_v2700.pdf - 第78页

Version 27.00, October 2024 78 Rohde & Schwar z R&S ® SMW200A Vec tor Signal Generator Connectors Front panel connec tors The following conne ctors are lo cated on the front panel of the instrumen t. RF 50 Ω (pat…

Version 27.00, October 2024

Rohde & Schwarz R&S

SMW200A Vector Signal Generator 77

Health and utilization monitoring service (HUMS)

(R&S

SMW-K980 option)

Interfaces

protocols and interfaces supported for

data readout and display

• SNMP (v1, v2c, v3)

• REST (JSON)

• SCPI

• device web

Services

information provided

• device information (model, serial

number, BIOS, date, time, system,

HUMS and software information)

• user-defined information tags

(e.g. for asset management)

• equipment information

(hardware, options, software, licenses)

• system operating status

• instrument security information

• service related information

(due dates etc.)

• mass storage related information

• instrument utilization data

• device history (event log)

Remote control

Interfaces

remote control

IEC 60625 (GPIB IEEE-488.2)

Ethernet/LAN

10/100/1000BASE-T

USB

3.0 (super speed)

serial

RS-232

Command set

SCPI 1999.5 or compatible command sets

IEC/IEEE bus address

0 to 30

Ethernet/LAN protocols and services

• VISA VXI-11 (remote control)

• Telnet/RawEthernet (remote control)

• VNC (remote operation with web

browser)

• FTP (file transfer protocol)

• SMB (mapping parts of the instrument

to a host file system)

Ethernet/LAN addressing

DHCP, static, support of ZeroConf and

M-DNS to facilitate direct connection to a

system controller

USB protocol

VISA USB-TMC

Requires the R&S

TS-USB1 serial adapter (recommended extra).

Version 27.00, October 2024

78 Rohde & Schwarz R&S

SMW200A Vector Signal Generator

Connectors

Front panel connectors

The following connectors are located on the front panel of the instrument.

RF 50 Ω (path A)

RF output path A

R&S

SMW-B1003, R&S

SMW-B1006,

R&S

SMW-B1007

N female

R&S

SMW-B1012, R&S

SMW-B1020,

R&S

SMW-B1031, R&S

SMW-B1040,

R&S

SMW-B1040N

test port adapter, PC 2.92 mm female

(interchangeable port connector system)

R&S

SMW-B1044, R&S

SMW-B1044N,

R&S

SMW-B1044O

PC 1.85 mm male (adapter 1.85 mm

female/female included)

R&S

SMW-B1056, R&S

SMW-B1056N,

R&S

SMW-B1056O, R&S

SMW-B1067,

R&S

SMW-B1067N, R&S

SMW-B1067O

1.85 mm female

(instrument equipped with

interchangeable 1.85 mm female/female

wear and tear adapter

)

RF 50 Ω (path B)

RF output path B

R&S

SMW-B2003, R&S

SMW-B2006,

R&S

SMW-B2007

N female

R&S

SMW-B2012, R&S

SMW-B2020,

R&S

SMW-B2031

test port adapter, PC 2.92 mm female

(interchangeable port connector system)

R&S

SMW-B2044, R&S

SMW-B2044N,

R&S

SMW-B2044O

PC 1.85 mm male (1.85 mm

female/female adapter included)

I (path A)

I modulation input signal, path A

BNC female

Q (path A)

Q modulation input signal, path A

BNC female

I (path B)

I modulation input signal, path B

BNC female

Q (path B)

Q modulation input signal, path B

BNC female

USER 1, USER 2, USER 3

user-configurable inputs or outputs,

e.g. as trigger input or marker output

BNC female

SENSOR

connector for R&S

NRP-Zxx power

sensor

6-pin ODU MINI-SNAP series B

USB

USB 2.0 connector for external USB

devices such as mouse, keyboard,

R&S

NRP-Zxx power sensors (with

R&S

NRP-Z4 adapter cable), memory

stick for software update and data

exchange, or USB serial adapter for

RS-232 remote control

USB type A

The factory calibration plane is at the output of the female/female adapter.

Version 27.00, October 2024

Rohde & Schwarz R&S

SMW200A Vector Signal Generator 79

Rear panel connectors

REF IN

reference frequency input

BNC female

REF OUT

reference frequency output

BNC female

INST TRG A

trigger input for RF path A,

e.g. for frequency or level sweep

BNC female

INST TRG B

trigger input for RF path B,

e.g. for frequency or level sweep

BNC female

USER 4, USER 5, USER 6

user-configurable inputs or outputs,

e.g. as trigger input or marker output

BNC female

EFC

input for electronic tuning of internal

reference frequency

BNC female

LO IN

phase-coherent LO input

SMA female

LO OUT

phase-coherent LO output

SMA female

IEEE 488

remote control of instrument via GPIB

24-pin Amphenol series 57 female

DISPLAY PORT

for future use

HDMI

for future use

LAN

provides remote control functionality and

other services, see section Remote

control

RJ-45

USB DEVICE

USB 3.0 (super speed) remote control of

instrument (USB-TMC)

USB type B

USB

USB 3.1 (10 Gbit/s super speed ports)

connector for external USB devices such

as mouse and keyboard for enhanced

operation,

R&S

NRP-Zxx power sensors (with

R&S

NRP-ZKU USB interface cable) for

external power measurements and level

adjustment of instrument,

memory stick for software update and

data exchange,

USB serial adapter for RS-232 remote

control

USB type A

IEEE 488

remote control of instrument via GPIB

24-pin Amphenol series 57 female

EXT 1, EXT 2

inputs for external analog modulation

signals

BNC female

DIG I/Q OUT 1, DIG I/Q OUT 2

digital output connectivity in line with

R&S

Digital I/Q Interface

26-pin MDR

HS DIG I/Q OUT 1, HS DIG I/Q OUT 2

high speed digital output connectivity in

line with R&S

Digital I/Q Interface

(R&S

SMW-B13XT only)

QSFP+/QSFP 28

Analog I/Q outputs

I/LF OUT 1

analog I output

BNC female

alternative function: LF generator output

I󰋀 1

analog I-bar output

BNC female

Q/LF OUT 2

analog Q output

BNC female

alternative function: LF generator output

Q󰋀 1

analog Q-bar output

BNC female

I, I󰋀, Q, Q󰋀

second set of analog I, I-bar, Q, Q-bar

outputs

BNC female

Connectors on standard baseband generator and fading simulator modules

T/M/C 1, T/M/C 4

multipurpose input/output connectors;

configurable as trigger input, marker

output or clock input or output

BNC female

T/M 2, T/M 3, T/M 5, T/M 6

multipurpose input/output connectors;

configurable as trigger input or marker

output

BNC female

DIG IQ IN/OUT 1, DIG IQ IN/OUT 2

digital input or output connectivity in line

with R&S

Digital I/Q Interface

26-pin MDR

Connectors on wideband baseband generator modules

T/M/C 1, T/M/C 3

for future use

BNC female

T/M 2, T/M 4

for future use

BNC female

DIG IQ IN/OUT 1, DIG IQ IN/OUT 2

for future use

26-pin MDR

HS DIG IQ IN/OUT 1,

HS DIG IQ IN/OUT 2

high-speed digital input connectivity in line

with R&S

Digital I/Q Interface

QSFP+/QSFP 28