IFS-NX_使用说明书.pdf - 第171页

IFS - NX 使用说明 书 第 5 章 Configura t or 5- 62 5-5- 3 -4 属性的初始值 属性的初始值如下： 属性 初始值 Fl oor Ac t i v ity T rac k i ng properties Num ber o f days befor e del et i ng i nactiv e raw mat erials: 0 Delay ( i n m inutes) bef ore unl…

100%1 / 440
IFS-NX 使用说明书 第 5 章 Configurator
5-61
5-5-3-3 JUKI IFS-NX 属性 (JUKI IFS-NX Properties)
进行 JUKI IFS-NX 的有关属性设定。
图
5-5-3-7 JUKI IFS-NX
属性
(1) JaNets IS File Management Web
服务的
URL
属性名：[JaNets/IS File Management Web Service URL:]
车间内安装了 aNets/IS 时，通过在本属性上设定 JaNets/IS 服务器的 File Management Web 服
务 URL，即可浏览 JaNets/IS 服务器里注册的生产程序。请按以下格式输入
http://janetsservername:80/juki.iss.webservices/FileManagementService/FileManagement
Service.asmx
在“JaNetsservername”里，请输入 JaNets/IS 服务器的计算机名及 IP 地址，接着输入 IS 端口号。
IFS-NX 使用说明书 第 5 章 Configurator
5-62
5-5-3-4 属性的初始值
属性的初始值如下：
属性
初始值
Floor Activity Tracking properties
Number of days before deleting inactive raw materials:
0
Delay (in minutes) before unloading the content of a feeder after it has been unloaded
(minimum 2 minutes):
0
Maximum time (in seconds) a reel will be considered loaded in a feeder in transit (0
disables this option):
(空栏)
Library XML import directory:
0
Library XML import monitor interval in seconds
(0 disables this option):
勾选
Enable initialization of multiple identical raw materials:
勾选
Require a confirmation when replenishing a feeder:
勾选
Display Supplier part number field into Raw Material Initialization Task:
无勾选
Allow the creation of new part numbers in the operator interface:
无勾选
Allow the modification of part numbers in the operator interface:
无勾选
Automatically generate lot numbers.
When "Y", the lot numbers are generated automatically during raw material
initialization.
The format is PN-YYYYMMDDHHMM:
无勾选
Enable extended confirmation mode:
无勾选
Item ID (lot number) maximum length for raw materials (minimum 5, maximum 250):
250
Component lot ID validation regular expression:
(
空栏
)
Part number maximum length (minimum 5, maximum 250):
250
Batch ID maximum length (minimum 5, maximum 50):
50
Time(s) of the day the inventory reports generator task should run (ex: 3:00, 15:00)
(empty=disabled):
(空栏)
Inventory reports folder:
(
空栏
)
Print component labels only once per container at unload:
勾选
Enable type-ahead for the input part numbers (in Operator Interface):
勾选
Include part number on item labels:
勾选
Automatic part number generator format (leave blank to disable):
(
空栏
)
Remaining number of boards before registering a low raw material on the Material
Status view
(0 disables this option):
0
Remaining time (in minutes) before registering a low raw material on the Material
Status view
(0 disables this option):
10
When a raw material is split, automatically delete the original item if the remaining
quantity reaches zero:
无勾选
When a raw material is split, if labels are printed, print also a label for the original lot:
无勾选
Allow automatically generating component lot numbers when scanning a supplier part
number:
勾选
Allow automatically generating component lot numbers when scanning a part
number:
无勾选
Allow automatically generating component lot when scanning a supplier part number
and a lot number:
勾选
Allow automatically generating component lot when scanning a part number and a lot
number:
勾选
Disable confirmation questions at unload:
无勾选
In the Raw Material Initialization task, allow initializing using the supplier part number
(the part number does not need to be specified):
勾选
Batch cleanup expiration delay (in days, 90=default):
90
Resolved tool alarm cleanup delay (in days, 90=default):
90
Automatically delete empty item when no confirmation is required on the replenish:
无勾选
IFS-NX 使用说明书 第 5 章 Configurator
5-63
属性
初始值
Feeder Verification properties
Require verification when loading a component in a feeder:
无勾选
Require verification on all feeders when loading a feeder bank on a Pick & Place:
无勾选
Enable feeder verification:
勾选
Feeder verification grace period when a reel is loaded on a feeder (in seconds,
0=disabled):
60
Feeder verification grace period when a feeder is loaded on a trolley (in seconds,
0=disabled):
0
Threshold value for replenish of auto-generated reel (in %):
100
Ask operator to confirm replenish of auto-generated reel:
无勾选
Enable load/unload on feeder verification:
勾选
MSD Control properties
Permit processing a product even if MSD raw materials are expired or do not meet
required MRET:
无勾选
Remaining floor life (hours) for first warning (green):
4
Remaining floor life (hours) for second warning (yellow):
1
Remaining floor life (hours) for third warning (red):
0
When sealing a bag, ask if a second label should be printed:
无勾选
Automatically seal in a bag when loading in ambient storage:
无勾选
Temperature and humidity reading frequency (in minutes):
60
Number of last temperature and humidity records to use in the average:
10
Automatically open the moisture barrier bag upon component initialization:
无勾选
Print two labels at initialization of MSD parts:
无勾选
Allow recording a prior bake performed without Cogiscan:
无勾选
Allow sealing all tray of the same lot number together:
无勾选
Cumulative bake time grace period (in minutes, minimum 0, maximum 60):
0
Minimum remaining floor life (in hours) to allow sealing the parts in a dry bag:
0
Validate MSD setup only:
无勾选
Product Control properties
Number of days before automatically marking old products as complete:
14
Time(s) of the day the marking old products task should run (ex: 3:00, 15:00):
3:00
Enable product group when releasing a product:
无勾选
Enable maximum active product limit on all tools:
无勾选
Ask for a batch Id when performing a change over:
无勾选
Number of boards used to calculate the average product cycle time:
10
Enable product release by importing the serial numbers from a TXT/CSV file:
无勾选
Number of product validation errors to display as warnings before displaying as an
alert (when the product is scanned by a PFC):
0
Enable the input of a note for product batch:
无勾选
Enable the input of a comment when performing a change over:
无勾选
Line Setup Control properties
Enable automatic change-over:
无勾选
Reserve materials having a sufficient quantity, when available:
无勾选
Path where files for products will be saved:
(
空栏
)
Reserve materials based on initialization date (FIFO):
无勾选
FIFO time window (in days, minimum 1)
Materials initialized within a given time window have the same priority:
1
Always use multiple batch mode:
无勾选
Input the number of boards instead of the number of panels:
无勾选
Ask for unloading all released component lot when freeing a job:
无勾选
Automatically reserve only materials already loaded in the bank:
无勾选
Validate feeder type and pitch:
无勾选
If the wrong feeder type is used, show as an error:
无勾选
Remove TOP/BOTTOM suffix from recipe name when importing for job setup:
勾选
Path where the raw material consumption XML reports are generated when jobs are
freed.:
(空栏)