IFS-NX_使用说明书.pdf - 第172页

IFS - NX 使用说明书第 5 章 Configura t or 5- 63 属性初始值 Feeder Ver if icati on properties Requir e v erific at i on w hen l oading a c o m ponent in a f ee der : 无勾选 Requir e v erific at i on on all f eeders when loadi ng a f …

IFS-NX 使用说明书第 5 章 Configurator

5-62

5-5-3-4 属性的初始值

属性的初始值如下：

属性

初始值

Floor Activity Tracking properties

Number of days before deleting inactive raw materials:

Delay (in minutes) before unloading the content of a feeder after it has been unloaded

(minimum 2 minutes):

Maximum time (in seconds) a reel will be considered loaded in a feeder in transit (0

disables this option):

(空栏)

Library XML import directory:

Library XML import monitor interval in seconds

(0 disables this option):

勾选

Enable initialization of multiple identical raw materials:

勾选

Require a confirmation when replenishing a feeder:

勾选

Display Supplier part number field into Raw Material Initialization Task:

无勾选

Allow the creation of new part numbers in the operator interface:

无勾选

Allow the modification of part numbers in the operator interface:

无勾选

Automatically generate lot numbers.

When "Y", the lot numbers are generated automatically during raw material

initialization.

The format is PN-YYYYMMDDHHMM:

无勾选

Enable extended confirmation mode:

无勾选

Item ID (lot number) maximum length for raw materials (minimum 5, maximum 250):

250

Component lot ID validation regular expression:

(

空栏

)

Part number maximum length (minimum 5, maximum 250):

250

Batch ID maximum length (minimum 5, maximum 50):

Time(s) of the day the inventory reports generator task should run (ex: 3:00, 15:00)

(empty=disabled):

(空栏)

Inventory reports folder:

(

空栏

)

Print component labels only once per container at unload:

勾选

Enable type-ahead for the input part numbers (in Operator Interface):

勾选

Include part number on item labels:

勾选

Automatic part number generator format (leave blank to disable):

(

空栏

)

Remaining number of boards before registering a low raw material on the Material

Status view

(0 disables this option):

Remaining time (in minutes) before registering a low raw material on the Material

Status view

(0 disables this option):

When a raw material is split, automatically delete the original item if the remaining

quantity reaches zero:

无勾选

When a raw material is split, if labels are printed, print also a label for the original lot:

无勾选

Allow automatically generating component lot numbers when scanning a supplier part

number:

勾选

Allow automatically generating component lot numbers when scanning a part

number:

无勾选

Allow automatically generating component lot when scanning a supplier part number

and a lot number:

勾选

Allow automatically generating component lot when scanning a part number and a lot

number:

勾选

Disable confirmation questions at unload:

无勾选

In the Raw Material Initialization task, allow initializing using the supplier part number

(the part number does not need to be specified):

勾选

Batch cleanup expiration delay (in days, 90=default):

Resolved tool alarm cleanup delay (in days, 90=default):

Automatically delete empty item when no confirmation is required on the replenish:

无勾选

IFS-NX 使用说明书第 5 章 Configurator

5-63

属性

初始值

Feeder Verification properties

Require verification when loading a component in a feeder:

无勾选

Require verification on all feeders when loading a feeder bank on a Pick & Place:

无勾选

Enable feeder verification:

勾选

Feeder verification grace period when a reel is loaded on a feeder (in seconds,

0=disabled):

Feeder verification grace period when a feeder is loaded on a trolley (in seconds,

0=disabled):

Threshold value for replenish of auto-generated reel (in %):

100

Ask operator to confirm replenish of auto-generated reel:

无勾选

Enable load/unload on feeder verification:

勾选

MSD Control properties

Permit processing a product even if MSD raw materials are expired or do not meet

required MRET:

无勾选

Remaining floor life (hours) for first warning (green):

Remaining floor life (hours) for second warning (yellow):

Remaining floor life (hours) for third warning (red):

When sealing a bag, ask if a second label should be printed:

无勾选

Automatically seal in a bag when loading in ambient storage:

无勾选

Temperature and humidity reading frequency (in minutes):

Number of last temperature and humidity records to use in the average:

Automatically open the moisture barrier bag upon component initialization:

无勾选

Print two labels at initialization of MSD parts:

无勾选

Allow recording a prior bake performed without Cogiscan:

无勾选

Allow sealing all tray of the same lot number together:

无勾选

Cumulative bake time grace period (in minutes, minimum 0, maximum 60):

Minimum remaining floor life (in hours) to allow sealing the parts in a dry bag:

Validate MSD setup only:

无勾选

Product Control properties

Number of days before automatically marking old products as complete:

Time(s) of the day the marking old products task should run (ex: 3:00, 15:00):

3:00

Enable product group when releasing a product:

无勾选

Enable maximum active product limit on all tools:

无勾选

Ask for a batch Id when performing a change over:

无勾选

Number of boards used to calculate the average product cycle time:

Enable product release by importing the serial numbers from a TXT/CSV file:

无勾选

Number of product validation errors to display as warnings before displaying as an

alert (when the product is scanned by a PFC):

Enable the input of a note for product batch:

无勾选

Enable the input of a comment when performing a change over:

无勾选

Line Setup Control properties

Enable automatic change-over:

无勾选

Reserve materials having a sufficient quantity, when available:

无勾选

Path where files for products will be saved:

(

空栏

)

Reserve materials based on initialization date (FIFO):

无勾选

FIFO time window (in days, minimum 1)

Materials initialized within a given time window have the same priority:

Always use multiple batch mode:

无勾选

Input the number of boards instead of the number of panels:

无勾选

Ask for unloading all released component lot when freeing a job:

无勾选

Automatically reserve only materials already loaded in the bank:

无勾选

Validate feeder type and pitch:

无勾选

If the wrong feeder type is used, show as an error:

无勾选

Remove TOP/BOTTOM suffix from recipe name when importing for job setup:

勾选

Path where the raw material consumption XML reports are generated when jobs are

freed.:

(空栏)

IFS-NX 使用说明书第 5 章 Configurator

5-64

属性

初始值

Grouping to apply to the raw material consumption XML reports generated when jobs

are freed (possible values are : batchId,lineName,toolId):

batchId,lineN

ame,toolId

Search for materials in storage only during reservation:

无勾选

Reserve materials based on component lot number (FIFO):

无勾选

Batch must exist, pre-released products:

无勾选

Automatically generate batch id at offline setup:

勾选

Traceability properties

Adjust product and material history when product ID''s (serial numbers) are changed:

无勾选

Take a raw material snapshot only at the start of an operation (do not track changes

to the raw materials during production):

无勾选

CAMX Interface Enabler properties

CAMX Web Service URL:

http://(CAMX

Server 名)

/cgscamx/CA

Enable recipe import via CAMX:

勾选

Generate product history for tools with SECS/GEM adapter:

无勾选

Equipment heartbeat interval (in minutes):

CAMX Event list to ignore (case sensitive, comma-separated):

(

空栏

)

CAMX Rotation interval (in minutes):

Send a notification event for quantity updates:

无勾选

Send MaterialTableInstalled extension as EquipmentWarning event:

无勾选

Number of hours an inactive CAMX session is considered as expired and deleted:

Delay to unload all feeders after a machine is down or no longer communicating with

Cogiscan (in minutes, machine type must be configured):

Create raw material with MaterialStateChange event of type

MaterialQuantityUpdated:

勾选

Raw Material Quantity Tracking properties

Automatically delete components with a remaining quantity of 0 (zero) when

unloading (requires CAMX for quantity updates):

无勾选

Quantity synchronization interval between the system and the database (in minutes,

0=disabled):

Generate history for automatic quantity synchronization:

勾选

Tool Maintenance Control properties

Prompt for an operator confirmation before processing a product when there are

warnings for a tool:

无勾选

Juki IFS-NX properties

Support using multiple trays in a tray pallet:

勾选

IS File Management Web Service URL:

(

空栏

)

Equipment Maintenance properties

Force all maintenances required for item to be completed when any maintenance has

been performed on the item:

无勾选

Time (hours) before the maintenance required warning for an equipment becomes

displayed as error (0=disabled):

Productivity Monitoring properties

Issue a warning on the production machine if the time since the last board exceeds

the average tact time by this factor

(0 disables this option):