IFS-NX_使用说明书.pdf - 第173页

IFS - NX 使用说明 书 第 5 章 Configura t or 5- 64 属性 初始值 Groupi ng to apply to t he raw m aterial consum pt i on XML r eports generated w hen j obs are fr eed (poss i ble v a l ues are : batchId,li neName,t oo l Id ) : batchI d…

100%1 / 440
IFS-NX 使用说明书 第 5 章 Configurator
5-63
属性
初始值
Feeder Verification properties
Require verification when loading a component in a feeder:
无勾选
Require verification on all feeders when loading a feeder bank on a Pick & Place:
无勾选
Enable feeder verification:
勾选
Feeder verification grace period when a reel is loaded on a feeder (in seconds,
0=disabled):
60
Feeder verification grace period when a feeder is loaded on a trolley (in seconds,
0=disabled):
0
Threshold value for replenish of auto-generated reel (in %):
100
Ask operator to confirm replenish of auto-generated reel:
无勾选
Enable load/unload on feeder verification:
勾选
MSD Control properties
Permit processing a product even if MSD raw materials are expired or do not meet
required MRET:
无勾选
Remaining floor life (hours) for first warning (green):
4
Remaining floor life (hours) for second warning (yellow):
1
Remaining floor life (hours) for third warning (red):
0
When sealing a bag, ask if a second label should be printed:
无勾选
Automatically seal in a bag when loading in ambient storage:
无勾选
Temperature and humidity reading frequency (in minutes):
60
Number of last temperature and humidity records to use in the average:
10
Automatically open the moisture barrier bag upon component initialization:
无勾选
Print two labels at initialization of MSD parts:
无勾选
Allow recording a prior bake performed without Cogiscan:
无勾选
Allow sealing all tray of the same lot number together:
无勾选
Cumulative bake time grace period (in minutes, minimum 0, maximum 60):
0
Minimum remaining floor life (in hours) to allow sealing the parts in a dry bag:
0
Validate MSD setup only:
无勾选
Product Control properties
Number of days before automatically marking old products as complete:
14
Time(s) of the day the marking old products task should run (ex: 3:00, 15:00):
3:00
Enable product group when releasing a product:
无勾选
Enable maximum active product limit on all tools:
无勾选
Ask for a batch Id when performing a change over:
无勾选
Number of boards used to calculate the average product cycle time:
10
Enable product release by importing the serial numbers from a TXT/CSV file:
无勾选
Number of product validation errors to display as warnings before displaying as an
alert (when the product is scanned by a PFC):
0
Enable the input of a note for product batch:
无勾选
Enable the input of a comment when performing a change over:
无勾选
Line Setup Control properties
Enable automatic change-over:
无勾选
Reserve materials having a sufficient quantity, when available:
无勾选
Path where files for products will be saved:
(
空栏
)
Reserve materials based on initialization date (FIFO):
无勾选
FIFO time window (in days, minimum 1)
Materials initialized within a given time window have the same priority:
1
Always use multiple batch mode:
无勾选
Input the number of boards instead of the number of panels:
无勾选
Ask for unloading all released component lot when freeing a job:
无勾选
Automatically reserve only materials already loaded in the bank:
无勾选
Validate feeder type and pitch:
无勾选
If the wrong feeder type is used, show as an error:
无勾选
Remove TOP/BOTTOM suffix from recipe name when importing for job setup:
勾选
Path where the raw material consumption XML reports are generated when jobs are
freed.:
(空栏)
IFS-NX 使用说明书 第 5 章 Configurator
5-64
属性
初始值
Grouping to apply to the raw material consumption XML reports generated when jobs
are freed (possible values are : batchId,lineName,toolId):
batchId,lineN
ame,toolId
Search for materials in storage only during reservation:
无勾选
Reserve materials based on component lot number (FIFO):
无勾选
Batch must exist, pre-released products:
无勾选
Automatically generate batch id at offline setup:
勾选
Traceability properties
Adjust product and material history when product ID''s (serial numbers) are changed:
无勾选
Take a raw material snapshot only at the start of an operation (do not track changes
to the raw materials during production):
无勾选
CAMX Interface Enabler properties
CAMX Web Service URL:
http://(CAMX
Server 名)
/cgscamx/CA
MX
Enable recipe import via CAMX:
勾选
Generate product history for tools with SECS/GEM adapter:
无勾选
Equipment heartbeat interval (in minutes):
1
CAMX Event list to ignore (case sensitive, comma-separated):
(
空栏
)
CAMX Rotation interval (in minutes):
15
Send a notification event for quantity updates:
无勾选
Send MaterialTableInstalled extension as EquipmentWarning event:
无勾选
Number of hours an inactive CAMX session is considered as expired and deleted:
1
Delay to unload all feeders after a machine is down or no longer communicating with
Cogiscan (in minutes, machine type must be configured):
0
Create raw material with MaterialStateChange event of type
MaterialQuantityUpdated:
勾选
Raw Material Quantity Tracking properties
Automatically delete components with a remaining quantity of 0 (zero) when
unloading (requires CAMX for quantity updates):
无勾选
Quantity synchronization interval between the system and the database (in minutes,
0=disabled):
20
Generate history for automatic quantity synchronization:
勾选
Tool Maintenance Control properties
Prompt for an operator confirmation before processing a product when there are
warnings for a tool:
无勾选
Juki IFS-NX properties
Support using multiple trays in a tray pallet:
勾选
IS File Management Web Service URL:
(
空栏
)
Equipment Maintenance properties
Force all maintenances required for item to be completed when any maintenance has
been performed on the item:
无勾选
Time (hours) before the maintenance required warning for an equipment becomes
displayed as error (0=disabled):
48
Productivity Monitoring properties
Issue a warning on the production machine if the time since the last board exceeds
the average tact time by this factor
(0 disables this option):
0
IFS-NX 使用说明书 第 5 章 Configurator
5-65
5-5-3-5 不可变更设定的属性
以下属性在 IFS-NX 中不使用。请按照初始值使用。
属性名
初始值
Line Setup Control properties
Validate feeder type and pitch:
不勾选
If the wrong feeder type is used, show as an error:
不勾选