00198706-01_AI_Stationaere_Kamera_25_33_GigE_SXV3_DE_EN.pdf - 第50页
50 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Stationäre Kamera Typ 25/33 (GigE) Stationary Camera Type 25/33 (GigE) 03/2021 Table of Contents 4 Appendix .. 81 4.1 Excerpts from the Service Manual ..…
49Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Stationäre Kamera Typ 25/33 (GigE) Stationary
Camera Type 25/33 (GigE) 03/2021
Table of Contents
Table of Contents
1 Introduction.. 51
1.1 Safety instructions.. 51
1.1.1 Conventions for the use of safety instructions and symbols.. 51
1.1.2 Safety instructions for working with strong magnetic fields.. 52
1.1.3 Safety instructions for the power supply.. 52
1.1.4 Safety instructions for the compressed air supply.. 54
1.1.5 Safety instructions for work on the cutting device.. 54
1.1.6 Safety instructions for the gantry.. 54
1.1.7 Safety instructions on hazardous materials.. 55
1.1.8 Classification of the optical systems.. 55
1.1.8.1 Classification of the whole machine.. 55
1.1.8.2 Laser classification.. 55
1.1.8.3 Classification of the camera systems.. 55
1.2 Preparatory work..... 55
1.3 Other instructions.. 57
1.3.1 Environmentally-friendly disposal of materials and components.. 57
1.3.2 Use of original accessories and spare parts.. 58
1.3.3 ESD guidelines.. 58
1.3.3.1 What does ESD mean?.. 58
1.3.3.2 Important measures to protect against static charging.. 58
1.3.3.3 Handling ESD modules.. 58
1.3.3.4 Measurements and modifications to ESD modules.. 58
1.3.3.5 Dispatching ESD modules.. 59
1.3.4 Release History.. 59
1.4 Staff qualifications and training.. 59
2 Brief Description.. 61
2.1 Overview of component cameras.. 61
2.1.1 Component camera technical data.. 62
2.2 Prerequisites and restrictions.. 63
2.3 Scope of delivery.. 64
2.4 Tools and Equipment Required.. 65
2.5 Required Working Time.. 65
3 Installation.. 67
3.1 General information.. 67
3.2 Installation position.. 68
3.3 Preparatory work on the machine.. 68
3.4 Preparatory work on the cameras.. 69
3.5 Fitting the cameras.. 71
3.5.1 Fitting the support plate assembly.. 71
3.5.2 Fitting the IC camera.. 72
3.5.3 Fitting the FC camera and support plate.. 73
3.6 Electrical connections.. 73
3.7 Fitting the reject bin (FC camera only).. 77
3.8 Final work.. 79
50 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Stationäre Kamera Typ 25/33 (GigE) Stationary
Camera Type 25/33 (GigE) 03/2021
Table of Contents
4 Appendix.. 81
4.1 Excerpts from the Service Manual.. 81
4.1.1 Replacing the Waste Tape Chute.. 81
4.1.2 Replacing the SX1/SX2 COT insert assembly.. 82
4.1.2.1 Fitting the Downholder.. 84
4.2 Description of Boards.. 90
4.2.1 PCBs Stationary Cameras.. 90
4.2.1.1 Vision LED Controller VLC25/33 GigE DTC.. 90
4.3 Circuit Diagrams.. 91
1 Introduction
1.1 Safety instructions
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Stationäre Kamera Typ 25/33 (GigE) Stationary
Camera Type 25/33 (GigE) 03/2021
51
1
1.1
Introduction
This manual describes the installation of the stationary cameras types 25 and 33 in SIPLACE
SX
1/SX2 V3 machines.
Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.