TP3447.Production Lot Operations_standard.pdf - 第24页

SMT Softw are En gineering Group IM Operations Y AMAHA M OTOR CO., L TD MDOC-SOFT50283 24/62 The board program appl icable to the selected production lot is loaded. The production lot information of the loaded board prog…

100%1 / 62
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50283
23/62
Select a production lot for the setup from the program list, and then click the [Open] button.
Board data reference destination for target
The board data reference destination selected in the “Location” combo-box becomes the
target.
* When the multi lane each folder function is set enabled, the board data reference
destination selected using the [Lane 1] button/[Lane 2] button becomes the target.
Board data type for target
The board program of the board data type selected in the “BoardData Type” combo-box
becomes the target.
When “YGX (Combined)” is selected, the combine board (CYGX) with the file name that
matches to the program name of the program list is loaded.
Board program name for target
Any of the following program names becomes the target according to the "Contrast
Program name num" of each machine application setting that is registered in IT-System
Server.
Program name [Standard]
Program name [1] to Program name [9]
* When “OP003: Auto Pgm Change Over” is used, the program name number conforms to
the "Contrast Program name num" in the option detail setting.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50283
24/62
The board program applicable to the selected production lot is loaded.
The production lot information of the loaded board program is displayed in the “Setup Board”
grids.
Item name Contents
Production Lot “Production lot” of the selected program list
Production Model “Production model (ASSY)” of the selected program list
Surface Info “Surface information” of the selected program list
4.1.3 Restrictions
There are no particular restrictions.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD
MDOC-SOFT50283
25/62
4.2 Setup preparations corresponding to the production lot
[Export Required Parts List] function was added.
The parts information necessary for the setup is exported to the file.
When performing the setup with the production lot selected, use this file to prepare the parts
necessary for the setup.
4.2.1 Introduction
4.2.1.1 Preparations
When exporting the required parts list, the board program needs to be loaded beforehand.
For details, see “4.1 Program selection corresponding to the production lot”.
* The [Export Required Parts List] function can be used even when the board program is
loaded using a procedure other than the production lot.
4.2.1.2 Settings
There are no particular settings.
4.2.2 Operation procedure
Select a target line, and then click [File (F)] - [Export Required Parts List (R)...] menu.
* If there is no setup target in the “Line” field, [File (F)]-[Export Required Parts List (R)...] menu
becomes invalid.