00193794-11_VD_SSW 505.05_de en.pdf - 第24页
Software Version Description, Station Software 505.05 07/2008 Edition 24 of 150 5 Features 5.1 The new features of a 505 system controller The table below shows all the new features of t he 505 station computer software …
Software Version Description, Station Software 505.05 07/2008 Edition
23 of 150
4.4.4 Restrictions
- Placement levels are not supported.
- Repair placement may be performed several times on positions without considering that thus the flux
media thickness reduces.
- Before a setup change, deactivated segments must be activated or the nozzles have to be removed
from the deactivated segments. Otherwise the system would probably try to pick up a new nozzle,
although a nozzle is still available.
- No automatic change of deactivated nozzles will be performed during the replacement operation.
- If the PCB cannot be completely placed due to the deactivation of a segment, the machine stops
with a track empty error. In this case, no automatic nozzle change is possible.
4.5 Integration of the "Deactivating Tape Cutter" Special Design
In this software version the tape cutter can be deactivated via the Software Options (please refer to the
Online Help system for the station software).
If the tape cutter is deactivated, the tape cutter task is not triggered by the software anymore. This
applies for all requests such as placement process and SITEST.
The option dialog has been adapted correspondingly as follows:
- The options are now customized to locations instead of gantries.
- The "With placem. of comp." and "Stop if Vision error" options can only be selected for the entire
machine.
- The "With comp. table" and "Disable tape cutting unit" functions are available for all locations.
This adaption was necessary to enable the individual selection of these options for each loacation on a
machine with one location per placement area.
4.5.1 Activating the function
¾ Select "Options / Software Options" in the Main menu to change into the options dialog.
¾ Select the corresponding location, click on "Disable tape cutting unit" and confirm the selection with
the "Accept" button.
Subsequently, the Software Options icon appears in the Main menu.
The "Disable tape cutting unit" option is stored in the registry, so that the state remains after a reboot.
4.5.2 Restrictions
After a reconfiguration (component table / MTC) possibly all locations might not be available in the
Software Options before the first reference run.
Software Version Description, Station Software 505.05 07/2008 Edition
24 of 150
5 Features
5.1 The new features of a 505 system controller
The table below shows all the new features of the 505 station computer software for the different
machine types. A distinction is made between the basic version and the full version of the 505 station
computer software.
Software Version Description, Station Software 505.05 07/2008 Edition
Feature HS-50 HS-50+ HS-60 S-25 HM S-27 HM HF/3 HF SC
software,
basic
version
SC
software,
full
version
Additional
information
Revision of the Forced
Setup Verification
9 9 9 9 9 9 9 9
Shutterless feeder –
Teaching pickup position
9 9 9
9 9 9 9
Whispering of fiducials
9 9 9 9 9
9
SIPLACE Pro 5.0
required
Integration of the "Repair
placement of hoisted
components" Special
Design
9 9 9 9 9 9 9 9
Integration of the
"Deactivating tape cutter"
Special Design
9 9 9 9 9 9 9 9
Improved error detection
for "missing nozzles"
9 9 9 9 9 9 9 9
Connection of line
computers and
monitoring of the
MaDaMas data
9 9 9 9 9
9
New S feeder: Shutterless
S feeder 3x8mm SL
9 9 9 9 9 9 9 9
SIPLACE Pro 5.0
required
Fine calibration enabled
9 9 9 9 9 9 9 9
Synchronization of data
provision
9 9 9 9 9 9 9 9
Revision of the dual
conveyor
9 9 9 9 9 9 9 9
External reading of the
machine ID
9 9 9 9 9 9 9 9
Improved placement
quality
9 9 9 9 9 9 9 9
25 of 150