00193794-11_VD_SSW 505.05_de en.pdf - 第68页
Software Version Description, Station Software 505.05 07/2008 Edition 5.44 Support for all features from the previous versions 502, 503 and 504 Important note: The following restrictions apply if the "Whi spering Do…
Software Version Description, Station Software 505.05 07/2008 Edition
5.42 Traceability 505
The following changes have been made since Traceabilty 503:
- The MTC 2 (Matrix Tray Changer) is supported by traceability or extended component
verification.
- It is possible to generate traceability data on the synchronous dual conveyor.
- The external set-up area is supported by the SMV (SIPLACE Mobile Verifier) system with the
CLS option.
Note:
The behavior of the previous component verification function is changed if the traceability
software version 505 is installed.
For a detailed description of the traceability function, see the Traceability, version 505
manual.
5.43 OIS Version 2.4
OIS Version 2.4 also supports SIPLACE HF and HF/3.
Note:
A detailed description can be found in "Getting started with OIS" and the online help
system for OIS 2.4.
67 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44 Support for all features from the previous versions 502, 503 and
504
Important note:
The following restrictions apply if the "Whispering Down The Line" feature is used:
Because of a change that has been made to the interface, the first placement station must
read in all ink spots or the information must be supplied from an external system (virtual ink
spot handler or Iskip).
5.44.1 All the features of a 502 system controller
The following description lists all the features of version 502.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 502.01 software version description.
5.44.1.1 Station computer
- Vision software version check
- Automatic compressed air deactivation
- Changes to single functions
- Obligatory component verification with barcode
- Automatic component verification of the entire location
- Checking of boards after emergency stop
- GUI (Graphical User Interface)
- GUI dynamic language extension
- Common vision user interface
- Panels without fiducials
- Moving to inkspots present in panels
- Component level indicator
- Error logger
- Version checking
- Fine calibration
- Machine capability analysis corrections
- Feeder position recognition
- Product-controlled manufacture using PCB barcode
- Whispering down the Line (WDTL)
68 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.1.2 Machine controller
- Head modularity, C&P6/C&P12
- Database
- Vacuum evaluation
- Head reference run
- Automatic location type detection
- Reduction in nonproductive times
- Ceramic substrate centering
- Nozzle changer on MTC
- Nozzle scanning
- Head reference run
- Switch to IPC
- End of tape detection
5.44.1.3 SITEST
- Firmware download
- Move star axis from parked position for Z and DP axis functions
- Parallel operations
- Location interrogation
- Configuration
- Head replacement
- Illumination values for live image
- Temperature sensor
- Motor adjustment
- Conveyor and tape speed
- Shut down computer
- Move gantries to set-up position
- Calibration of the MA measurement point
69 of 150