00193794-11_VD_SSW 505.05_de en.pdf - 第67页
Software Version Description, Station Software 505.05 07/2008 Edition 5.42 T raceability 505 The following changes have been made since Traceabilty 503: - The MTC 2 (Matrix Tray Changer) is suppor ted by traceability or …
Software Version Description, Station Software 505.05 07/2008 Edition
-
"Current carrier" field -> "Magazine configuration..." button (new): This is used to call the dialog
which allows you to change the current magazine configuration for the selected magazine
carrier.
- "Calibrate" field -> "Magazine position…" button (new). This is used to call the "Calibrate
magazine position" dialog box in which you can select the options for calibration. These can be
called directly via the buttons in the "Calibrate" field of version 504.xx.
The following options can be set for calibrating the magazine position(s):
All magazines (all carriers) During calibration, the positions are determined for all
magazines on the magazine carriers configured for the
current location.
All magazines (current carrier) During calibration, the positions are determined for all
magazines set up on the selected magazine carrier.
Current magazine During calibration, the positions are determined for the
selected magazine.
With pick-up height During calibration of the magazine positions, it is also
possible to carry out the function for determining the pick-
up height(s).
With reject position During calibration of the magazine positions, it is also
possible to carry out the function for determining the
reject position.
Inputs/outputs:
- The view for the inputs and outputs has been adapted to the new input and output groups.
5.41 GEM 505
No changes have been made to the GEM 505 software since version 504.
Note:
A detailed description can be found in the software guide for the GEM Interface.
66 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.42 Traceability 505
The following changes have been made since Traceabilty 503:
- The MTC 2 (Matrix Tray Changer) is supported by traceability or extended component
verification.
- It is possible to generate traceability data on the synchronous dual conveyor.
- The external set-up area is supported by the SMV (SIPLACE Mobile Verifier) system with the
CLS option.
Note:
The behavior of the previous component verification function is changed if the traceability
software version 505 is installed.
For a detailed description of the traceability function, see the Traceability, version 505
manual.
5.43 OIS Version 2.4
OIS Version 2.4 also supports SIPLACE HF and HF/3.
Note:
A detailed description can be found in "Getting started with OIS" and the online help
system for OIS 2.4.
67 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44 Support for all features from the previous versions 502, 503 and
504
Important note:
The following restrictions apply if the "Whispering Down The Line" feature is used:
Because of a change that has been made to the interface, the first placement station must
read in all ink spots or the information must be supplied from an external system (virtual ink
spot handler or Iskip).
5.44.1 All the features of a 502 system controller
The following description lists all the features of version 502.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 502.01 software version description.
5.44.1.1 Station computer
- Vision software version check
- Automatic compressed air deactivation
- Changes to single functions
- Obligatory component verification with barcode
- Automatic component verification of the entire location
- Checking of boards after emergency stop
- GUI (Graphical User Interface)
- GUI dynamic language extension
- Common vision user interface
- Panels without fiducials
- Moving to inkspots present in panels
- Component level indicator
- Error logger
- Version checking
- Fine calibration
- Machine capability analysis corrections
- Feeder position recognition
- Product-controlled manufacture using PCB barcode
- Whispering down the Line (WDTL)
68 of 150