00193794-11_VD_SSW 505.05_de en.pdf - 第66页
Software Version Description, Station Software 505.05 07/2008 Edition - "Current carrier" field -> "Magazine configuration ..." button (new): This is used to call the dialog which allows you to cha…
Software Version Description, Station Software 505.05 07/2008 Edition
Twin Head: "Nozzle changer magazine functions" view (has been completely redesigned)
- The configured magazine carriers are displayed and can be selected.
- "Current carrier" field -> "Magazine configuration..." button (new): This is used to call the dialog
which allows you to change the current magazine configuration for the selected magazine
carrier.
- "Calibrate" field -> "Magazine position…" button (new). This is used to call the "Calibrate
magazine position" dialog box in which you can select the options for calibration. These can be
called directly via the buttons in the "Calibrate" field of version 504.xx.
- The following options can be set for calibrating the magazine position(s):
All magazines (all carriers) During calibration, the positions are determined for all
magazines on the magazine carriers configured for both
current locations.
All magazines (current carrier) During calibration, the positions are determined for all
magazines set up on the selected magazine carrier.
Current magazine During calibration, the positions are determined for the
selected magazine.
With pick-up height During calibration, the pick-up heights (specified heights)
for the magazines are also determined.
Twin Head – "Coplan" view (new)
- In this view, the function for calibrating the coplanarity module for HF and HF/3 machines is
available; for more information see the description of the feature in section
5.27 "Coplanarity
module
".
C&P head: "Nozzle changer head functions" view (has been partially redesigned)
- The table has been extended to include the columns "Location" and "Carrier"; the column
header "Actual" was previously "Actual nozzle" and "Preset" was previously "Preset nozzle".
- "Nozzle changer" field -> "Magazine occupancy…" button has been changed from "Change
configuration".
C&P head: "Nozzle changer magazine functions" view (has been completely redesigned)
- The configured magazine carriers are displayed and can be selected.
- "Current carrier" field -> "Magazine occupancy…" button has been changed from "Change
configuration".
65 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
-
"Current carrier" field -> "Magazine configuration..." button (new): This is used to call the dialog
which allows you to change the current magazine configuration for the selected magazine
carrier.
- "Calibrate" field -> "Magazine position…" button (new). This is used to call the "Calibrate
magazine position" dialog box in which you can select the options for calibration. These can be
called directly via the buttons in the "Calibrate" field of version 504.xx.
The following options can be set for calibrating the magazine position(s):
All magazines (all carriers) During calibration, the positions are determined for all
magazines on the magazine carriers configured for the
current location.
All magazines (current carrier) During calibration, the positions are determined for all
magazines set up on the selected magazine carrier.
Current magazine During calibration, the positions are determined for the
selected magazine.
With pick-up height During calibration of the magazine positions, it is also
possible to carry out the function for determining the pick-
up height(s).
With reject position During calibration of the magazine positions, it is also
possible to carry out the function for determining the
reject position.
Inputs/outputs:
- The view for the inputs and outputs has been adapted to the new input and output groups.
5.41 GEM 505
No changes have been made to the GEM 505 software since version 504.
Note:
A detailed description can be found in the software guide for the GEM Interface.
66 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.42 Traceability 505
The following changes have been made since Traceabilty 503:
- The MTC 2 (Matrix Tray Changer) is supported by traceability or extended component
verification.
- It is possible to generate traceability data on the synchronous dual conveyor.
- The external set-up area is supported by the SMV (SIPLACE Mobile Verifier) system with the
CLS option.
Note:
The behavior of the previous component verification function is changed if the traceability
software version 505 is installed.
For a detailed description of the traceability function, see the Traceability, version 505
manual.
5.43 OIS Version 2.4
OIS Version 2.4 also supports SIPLACE HF and HF/3.
Note:
A detailed description can be found in "Getting started with OIS" and the online help
system for OIS 2.4.
67 of 150