00193794-11_VD_SSW 505.05_de en.pdf - 第62页

Software Version Description, Station Software 505.05 07/2008 Edition 5.38 Supported feeder types Note: As of software version 505.xx bulk case feeders are also supported for HF and HF/3 machines. Surf tape feeders are n…

100%1 / 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.37 Enhancement of the station software to include conveyor-
related items
The following conveyor-related items have been added to Version 505.03 of the software.
5.37.1 Requirements
- Optional stopper for the modular conveyor
An optional stopper can be installed on the S-27HM, HS-60, HF and HF/3 and used instead of
the laser light barrier to position the PCB.
- Setting conveyor acceleration/deceleration
In SITEST the speed at which the PCBs are transported can be set. In addition, the acceleration
and deceleration for the modular conveyor (S-27HM, HS-60, HF, HF/3) can also be set.
- Saving the machine parameters for the conveyor
A number of different parameters can be set for the conveyor (conveyor speed, options,
calibration for width adjustment, etc.). These are lost when the conveyor controller is replaced.
These machine parameters are now saved in SITEST and can be restored.
- Calibration of the conveyor width with editable PCB width
The conveyor width of editable PCBs can be calibrated in SITEST.
5.37.2 Restrictions – optional stopper for the modular conveyor
- Within a single conveyor on a machine with 2 placement areas, it is not possible to mix a
stopper with a laser light barrier (nor would this make sense given the error message specified
under the requirements).
- Hardware-related restrictions imposed by the optional stopper are not dealt with in this
document.
61 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.38 Supported feeder types
Note:
As of software version 505.xx bulk case feeders are also supported for HF and HF/3
machines.
Surf tape feeders are now also supported for the Twin Head on HF and HF/3 machines.
The following feeders are supported by version 505.xx of the software:
- Linear feeder type III, 9.5 mm Track type: 2
- Linear feeder type III, 10 mm Track type: 3
- Linear feeder type III, 15 mm Track type: 4
- Linear feeder type III, 30 mm Track type: 5
- 8 mm S tape feeder Track type: 150
- 3 x 8 mm S tape feeder Track type: 79
- 3 x 8 mm surf 0201 tape feeder Track type: 78
- 3 x 8 mm SL (Shutterless feeder) Track type: 76
- 12 mm S tape feeder Track type: 60
- 16 mm S tape feeder Track type: 61
- 24 mm S tape feeder Track type: 62
- 32 mm S tape feeder Track type: 63
- 44 mm S tape feeder Track type: 64
- 56 mm S tape feeder Track type: 65
- 72 mm S tape feeder Track type: 66
- 88 mm S tape feeder Track type: 67
- Bulk case feeder BC_AIR
- 8 mm surf tape feeder Track type: 80
- 12 mm surf tape feeder Track type: 81
- 16 mm surf tape feeder Track type: 82
- 24 mm surf tape feeder Track type: 83
- Manual tray Track type: No track type necessary
62 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.39 Component range
12-seg. C&P head 0201 -18.7 x 18.7 mm
12-seg. C&P head DCA 0201 -13 x 13 mm
6-seg. C&P head 0603 – 32 x 32 mm
6-seg. C&P head DCA 0201 -13 x 13 mm
Twin Head 0603 – Single measurement up to 40 x 50 mm
5.40 SITEST
Note:
A detailed description of the new SITEST functions can be found in the Software Guide
505 and the SITEST online Help system.
The following changes have been made in SITEST for version 505.xx of the software:
Main view: Calibrate machine…
- Dialog box "Calibrate entire machine" -> field "Mapping" -> button "Extended…" used to be
"Heads and mapping...".
Main view: "Settings" menu -> "Machine configuration…" menu option
- The "Machine configuration – Gantry" dialog box has been redesigned. The "Nozzle changer"
field displays the configuration of the magazine carriers for the nozzle changers at the various
locations and can be changed as required.
Main view: "Settings" menu -> "Head replacement…" menu option
- The "Head exchange C&P head 1" and "Head exchange Twin Head" dialog boxes have been
redesigned. In the "Functions" tab, the "Nozzle changer" field displays the configuration of the
magazine carriers for the nozzle changers at the various locations and can be changed as
required.
Conveyor: "Conveyor functions" view
- Redesigned functions for testing the sensors and stop units (stopper replaced by stop unit).
- "PCB to processing conveyor 1" and " PCB to processing conveyor 2" replaced by " PCB to
processing conveyor" and "PCB to next stop position".
The function "Change transport mode" is now in the new Options view
63 of 150