00193794-11_VD_SSW 505.05_de en.pdf - 第80页

Software-Versionsbeschreibung Stationssoftware 505.05 Ausgabe 07/2008 80 von 150 1. Kurzbeschreibung Dieses Dokument beschreibt die Betriebssoftware der SIPLACE ® -Automaten in Version 505.05 mit folgenden Komponenten: -…

100%1 / 150
Software Version Description, Station Software 505.05 07/2008 Edition
-
Anti-crash circuit in PA1 at the HF (from series A-001):
In an HF/3, the anti-crash board applies a 15 V signal at an input port in order to query the
status of the anti-crash board. For the HF (from series A-001) (SW 505.02), the Logical
Subsystem I/O (LSSIO) has already been taken over from the 601 software. This means that
this port is queried. However, it is not possible to set a port to the status "low" or "high".
Workaround: A connector with a bridge between pin 1 and 4 is installed at connector No. X4 ra
(see fig. below) in the subdistributor of all HF machines (from series A-100). This sets the input
for the gantry distance to "high" at hardware level. Connector X4 ra was previously unused.This
connector is installed for system acceptance purposes and may not be removed.
Note:
This connector is installed for system acceptance purposes and may not be removed. If the
connector is removed, error messages relating to the gantry distance are output. This
connector is not installed at the standard HF and is not required there. Connector X4 ra
therefore continues to be unused in the HF.
Note:
For more details please refer to the technical information "Anti Crash Circuit in PB 1 at the HF
(from series A-001)" (44V01084).
Fig. 6-1: Connector X4 ra in the subdistributor
79 of 150
Software-Versionsbeschreibung Stationssoftware 505.05 Ausgabe 07/2008
80 von 150
1. Kurzbeschreibung
Dieses Dokument beschreibt die Betriebssoftware der SIPLACE
®
-Automaten in Version 505.05 mit
folgenden Komponenten:
- Grafische Bedienoberfläche (GUI)
- Testsoftware (SITEST)
- Stationsrechner (SR)
- Maschinencontroller (MC)
Die Software wurde speziell zum Betrieb der folgenden Automatentypen entwickelt:
- SIPLACE HF
- SIPLACE HF/3
- SIPLACE HS-50, HS-50+
- SIPLACE HS-60
- SIPLACE S-25HM
- SIPLACE S-27HM
Software Versionsbeschreibung, Stationssoftware 505.05 Ausgabe 07/2008
81 von 150
2. Lieferumfang
2.1. Software-Komponenten
Software 505.05
Basisversion: 00375295-15 Software SIPLACE Station 505/9-505.05 Basic
- Software-CD-ROM
(1)
- Lizenz / Produktschein
- Software-Installationsanleitung SR V505.05 D+E (00193796-11)
- Software-Versionsbeschreibung SR V505.05 D+E (00193794-11)
- CD-ROM Softwareanleitungen V505.xx, D+E (00193798-01)
- Verpackung
Vollversion: 00375300-01 Lizenz SIPLACE Station 505.xx – Full
- Lizenz / Produktschein / Freischalt-Schlüssel
- Verpackung
Fremdsprachen: 00375290-11 Software SIPLACE Fremdsprachen SR 505.05
- Software-CD-ROM (Spracherweiterung)
- Lizenz / Produktschein
- Software-Versionsbeschreibung Fremdsprachen V505.05 D+E (00193795-0x)
- CD-ROM Softwareanleitungen V505.xx, ALL (00193798-02)
- Verpackung
1) Auf der CD befinden sich die Standardapplikationen:
- Installationsdisketten für das Betriebsystem des Maschinen-Controller
- Embedded Software für Transport
- Embedded Software für Achsen
- Embedded Software für Tisch
- Embedded Software für Gurtschneider
- Embedded Software für Kopf
- Embedded Software für MTC
- Embedded Software für Kameras
- Embedded Software für SLIO's
- Diverse Treiber, die für den Betrieb auf einer SIPLACE notwendig sind.