SOM-1735-001.pdf - 第10页
5. Component Library Data 5.1 List of Dat a 5.1.1 List of Common Component Dat a The common component data applies to all leadless, leaded and area array components and is classified into three list s. Fig. 4 A01 List of…
4. Classification of Component Shapes
Component shapes are classified to distinguish each component library
data group.
The BGA/CSP components are included in the "Area Array" group.
BGA : Ball Grid Array
CSP : Chip Scale Package
LGA : Land Grid Array
Table 2
Component Shape Applicable Components (Reference)
BGA/CSP • Grid Array Components
BGA, LGA, CSP, and other similar-
shaped components
Fig. 3
0307-001 8 Tg0930-PM-SO
Note
4. Classification of Component Shapes
5. Component Library Data
5.1 List of Data
5.1.1 List of Common Component Data
The common component data applies to all leadless, leaded and area
array components and is classified into three lists.
Fig. 4
A01 List of Identification Data
Table 3
No. Data Name Reference No. Remarks
1 Component ID A01_01 See "Note" below.
2 Comment A01_02 See "Note" below.
3 Component Shape A01_03
4 Component Type A01_04 See "Note" below.
Refer to the instruction manual "Component Library for TCM-X
Series" for details.
5. Component Library Data
List of Common
Component Data
• Leadless Components
"Cylindrical, Square, Deform
(Simple)"
• Leaded Components
"IC, Connector, Other Leaded"
• Area Array
"BGA/CSP"
A01 List of Identification Data
A02 List of Control Data
A03 List of Carrier Data
Note
0307-001 9 Tg0930-PM-SO
A02 List of Control Data
Table 4
No. Data Name Reference No. Remarks
1 Speed Data A02_01 See "Note" below.
(1) Pick-Up [sec]
(2) Rotary turret [sec]
(3) Placement [sec]
(4) X/Y table
(5) Feeder carriage
(6) Nozzle rotation
(7) Recognition time [sec]
2 Selected nozzle A02_02 See "Note" below.
3 Placement height feedback A02_03 See "Note" below.
4 Cmpnt thickness check [mm] A02_04 See "Note" below.
5 Vertical cmpnt data [mm] A02_05 See "Note" below.
6 Pickup level [mm] A02_06 See "Note" below.
7 Placement level [mm] A02_07 See "Note" below.
8 Pickup pos correction A02_08 See "Note" below.
X [mm], Y [mm]
9 Auto for axis adjustment X, Y A02_09 See "Note" below.
10 Error process 1, 2 A02_10 See "Note" below.
Refer to the instruction manual "Component Library for TCM-X Series"
for details.
A03 List of Carrier Data
Table 5
No. Data Name Reference No. Remarks
1 Carrier Data A03_01 See "Note" below.
(1) Type
(2) Tape width [mm]
(3) Tape feed pitch [mm]
(4) Tape feed counts
(5) Direction
(6) Q’ty
2 Tape end detection A03_02 See "Note" below.
Refer to the instruction manual "Component Library for TCM-X
Series" for details.
5.1 List of Data
Note
Note
0307-001 10 Tg0930-PM-SO