SOM-1735-001.pdf - 第55页
10.2 T ypical Description T able 16 Recognition Error ID Item Description 02 ** 1000 ** Component Missing Component was not found. (Cause 1) The feeder carriage is loaded with a feeder that contains components dif- feren…
*5 Number of Pages
Displayed are the total number of pages and the number of the
current page.
Example: (3/5)
Total Number of Pages : 5
Number of Current Page : 3
*6 [Prev] and [Next] Buttons
[Prev] Button: When pressed, this button opens the previous
page.
[Next] Button: When pressed, this button opens the next page.
*7 [Clear Alarm] Button
When pressed, this button cancels an alarm (sound) only.
*8 [RETURN] Button
When pressed, this button cancels an alarm (sound) and closes
the “ERROR” window. The original window resumes.
••
••
• Reset Procedure from "ERROR" Window
(1) Take a note of "Recognition Error ID", "Item (Error Name)", and
"Description" in the "ERROR" window.
Note: When you have forgotten an error message, refer to the list
of errors in the "Machine Error Recall" window. (Operation
Sequence: [RECALL] Button (Submenu) Æ "Device Err" Win-
dow).
(2) Press the [RETURN] button to resume the original window.
(3) Use the recognition error ID as an index and refer to "10.4 Recogni-
tion Error IDs and Remedial Procedures" for details.
0307-001 53
Tg0930-PM-SO
10.1 "ERROR" Windows
10.2 Typical Description
Table 16
Recognition Error ID Item Description
02 ** 1000 ** Component Missing Component was not found.
(Cause 1) The feeder carriage is loaded with a feeder that contains components dif-
ferent from the specified ones.
(Cause 2) The vacuum suction force is too weak.
(Cause 3) An improper nozzle is selected for the components or vice versa.
Mismatching parameters are set in the nozzle type data and the compo-
nent library data.
(Remedy 1) Check if proper components are used.
(Remedy 2) Check the vacuum pressure.
(Remedy 3) Check the parameters in the nozzle type data and the component library
data.
02 ** 2101 ** Error in Outward Length Inspection Component Outward Length X is incorrect.
(Cause 1)
(Remedy 1)
(Continued to the next page.)
*1 The recognition error IDs (IDs displayed in the "ERROR" win-
dow) are described in the numerical order.
*2 Described are the error name (item) and the description in the
"ERROR" window.
*3 Described are the causes and remedial procedures of the errors
in "*2 (Item and Description)"
The causes and remedies are correlated as follows.
(Cause 1) Æ (Remedy 1)
(Cause 2) Æ (Remedy 2)
(Cause 3) Æ (Remedy 3)
*4 This indicates that the related contents are described subse-
quently on the next page.
10.2 Typical Description
*1
*2 *3
*2
0307-001 54 Tg0930-PM-SO
*4
10.3 Recognition Error IDs and Controlled Areas
Basic System of Recognition Error IDs
A recognition error ID is expressed by 10 digits (decimal number) as
follows.
AA BB C DDDDD
Detailed Classification:
Detail Code based on Classifica-
tion of Recognition Functions
Error Classification:
Secondary Classification Code of
Detailed Classification
Error Classification:
Primary Classification Code of De-
tailed Classification
Classification of Recognition Functions
Classification of Recognition Functions
Table 17
Recognition Error ID Classification of Recognition Functions
01 Recognition Communication
02 Component Recognition Function
10 Various Teaching Functions
13 Burnout of Lighting Lamp for Component
Recognition
Refer to the instruction manual of the main machine for the
information on recognition error IDs other than the above-de-
scribed ones.
10.3 Recognition Error IDs and Controlled Areas
Note
0307-001 55 Tg0930-PM-SO