SOM-1735-001.pdf - 第42页

7. Measurement of Component Dimensions Measure the dimensions (*1 through *10) in the figure below . When a component has several electrode groups, set "Enable" in the "Extended setting" text box and …

6.4 Specifications of Packaging

Refer to the instruction manual "Component Library for TCM-X

Series" for details.

Specifications of Packaging for Components with 8 or more Leads

• Applicable Packaging Types

Paper, Embossed, Adhesive, and Bulk Tapes

• Applicable Components

ICs with 8 or more leads

Refer to the following table.

Table 13

Component Type Abbreviation Part Name

IC BGA Ball Grid Array-Type IC

6.4 Specifications of Packaging

Note

0307-001 40 Tg0930-PM-SO

7. Measurement of Component Dimensions

Measure the dimensions (*1 through *10) in the figure below.

When a component has several electrode groups, set "Enable" in the

"Extended setting" text box and measure the dimensions (*5 through

*10) for Electrode Groups 2 through 6.

As for components with missing electrodes, set "Enable" in the "Ex-

tended setting" text box and the number of missing blocks in the "# of

Missing Electrodes" text box. After that, measure the dimensions (*11

through *14) in the figure.

When there are several missing blocks, measure the dimensions (*11

through *14) for Missing Electrodes 2, 3, and so on.

(Up to 40 blocks can be specified as electrode-missing blocks.)

(a) The figure shows the top view (ball-missing side) of the

component and is an example of "# of Electrode Groups

= 1".

(b) The center of the

mark is the reference point of the

component.

(In normal cases, the reference point is located at the

center of the mold.)

Fig. 95

7. Measurement of Component Dimensions

Note

0307-001 41 Tg0930-PM-SO

The figure shows the top view (electrode-missing side) of the

component.

Fig. 96

Individual Data Sheet (BGA/CSP)

Minimum Unit: 0.001 mm

*1 Mold size X [mm]

*2 Mold size Y [mm]

*3 Mold size t [mm] (thickness) [T [mm] (thickness)]

*4 Elctd Type #1 Dim 1 [mm]

*5 Gp Posn X [mm] of Gp No. 1

*6 Gp Posn Y [mm] of Gp No. 1

*7 Row Pitch [mm] of Gp No. 1

*8 Col Pitch [mm] of Gp No. 1

*9 # Of Rows [pcs.] of Gp No. 1

*10 # Of Cols [pcs.] of Gp No. 1

*11 Missing Stg Row of Elctd Grp No. 1

*12 Missing Stg Col of Elctd Grp No. 1

*13 # Of Missing Rows [pcs.] of Elctd Grp No. 1

*14 # Of Missing Cols [pcs.] of Elctd Grp No. 1

0307-001 42 Tg0930-PM-SO

7. Measurement of Component Dimensions

Note