SOM-1735-001.pdf - 第65页
1 1. Component Library Dat a Sheet s This section describes the data sheet s to be filled in with the measured dimensions of a component, etc. • • • • • Frame Line of Sheets : T o be filled with standard dat a : T o be f…
(4) Component Recognition Lighting Lamp Burnout Errors
AA BB C DDDDD
Detail Code
Secondary Error Classification (0)
Primary Error Classification (0)
Classification of Recognition Functions
(13)
Table 22
Recognition Error ID Item Description
13 00 0 00003 ---- The lamp for Front Lighting 3 (Ring 2) has
blown in the component recognition light-
ing unit.
(Cause 1) The lamp of the component recognition lighting device was burnt out.
(Remedy 1) Replace the lamp with a new one.
After the replacement, perform the teaching operation required for com-
ponent recognition.
0307-001 63 Tg0930-PM-SO
10.4 Recognition Error IDs and Remedial Procedures
11. Component Library Data Sheets
This section describes the data sheets to be filled in with the measured
dimensions of a component, etc.
••
••
• Frame Line of Sheets
: To be filled with standard data
: To be filled with extended data
11.1 Sheets for BGA/CSP Components
Date of Preparation
Prepared by
Classification Data
Component ID
Comment
Component Shape BGA/CSP
Component Type R (Resistor), C (Capacitor), L (Coil), FL (Filter),
DI (Diode), TR (Transistor), IC,
VR (Variable Resistor), LED (Light Emitted Diode),
TC (Trimmer Capacitor), T (Transformer),
CN (Connector), SW (Switch),
CSA (Ceramic Sense Amplifier Oscillator,
ETC (Others)
Control Data (1)
Speed Data Pick-Up . second
Head transfer . second
Rotary turret . second
X/Y table Full Speed
10 20 30 40 50
60 70 80 90 %Decr
Feeder carriage Full Speed
10 20 30 40 50
60 70 80 90 %Decr
Nozzle rotation Full Speed
10 20 30 40 50
60 70 80 90 %Decr
Recognition time . second
11. Component Library Data Sheets
0307-001 64 Tg0930-PM-SO
0307-001 65 Tg0930-PM-SO
Control Data (2)
Selected nozzle
Placement height Enable, Disable
feedback
Cmpnt thickness . mm
check
Vertical cmpnt . mm
data
Pickup level +/− . mm
Placement level +/− . mm
Pickup pos correction X +/− . mm
Y +/− . mm
Carrier Data
Carrier Data Type Paper, Embossed, Adhesive,
Bulk 1, Bulk 2
Tape width 8, 12, 16, 24, 32, 44 mm
Tape feed pitch 2, 4, 8, 12, 16, 24, 32 mm
Tape feed counts 1, 2, 3, 4, 5, 6, 7, 8, 9
Direction 0°, 45°, 90°, 135°, 180°,
225°, 270°, 315°
Q’ty pcs.
Tape end Enable, Disable
detection
11. 1 Sheets for BGA/CSP Components
Auto fdr axis X Enable, Disable
adjustment Y Enable, Disable
Error process 1 1, 2, 3, 4, 5, 6, 7, 8, 9
2 1, 2, 3, 4, 5, 6, 7, 8, 9