DECAN_S2_Trouble(Eng_Ver4.2).pdf - 第145页

1-123 System Messages of the MMI and Solutions $a617 Can not find the last (lower side) lead of the right lead group. [Problem]  Failed to rec ognize the right lead of upper lead group on the SMV ision windo w while rec…

100%1 / 200
1-122
Advanced Chip Shooter DECAN S2 Troubleshooting Guide
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
$a612 Can not find the first (upper side) lead of left lead group.
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
$a613 Can not find the last (lower side) lead of left lead group.
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
$a614 Can not find the first lead (left side) of lower lead group.
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
Perform [Solution] in $a610.
$a615 Can not find the last (right side) lead of the lower lead group.
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
$a616 Can not find the first (upper side) lead of right lead group.-+
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
1-123
System Messages of the MMI and Solutions
$a617 Can not find the last (lower side) lead of the right lead group.
[Problem]
Failed to recognize the right lead of upper lead group on the SMVision window while
recognizing components.
[Solution]
Perform [Solution] in $a610.
$a620 Recognized pitch(%d) in the lead group(%d) is larger than registered pitch(%d).
[Problem]
The pitch recognized by the vision is larger than the registered pitch.
Lead of component is bent.
Input the pitch of component is incorrect.
Setup of lighting level is inadequate.
[Solution]
Check if the lead of component is bent.
Perform [Solution] in $a610.
$a621 Pitch(%d) recognized by lead group(%d) is smaller than the registered pitch(%d).
[Problem]
The pitch recognized in the vision is smaller than the registered pitch.
The component lead is bent.
Input the pitch of component is incorrect.
Lighting level setup is inadequate.
[Solution]
Check if the lead of component is bent.
Perform [Solution] in $a610.
$a631 There is not a bright(%d) pixel on the first(left side)lead of upper lead group.
[Problem]
The lead was not recognized when recognizing the component lead.
Can not actually pickup the component.
Lighting level was setup too dark.
The component size is inputted incorrectly.
[Solution]
Check if the component was actually picked up.
Perform [Solution] in $a610.
1-124
Advanced Chip Shooter DECAN S2 Troubleshooting Guide
$a632 There is not a bright pixel(%d) on the first(upper side) lead of left lead group.
[Problem]
$a632There is not a bright pixel(%d) on the first(upper side) lead of left lead group.
The component was not picked up actually.
Lighting level was setup too dark.
The component size was inputted incorrectly.
[Solution]
Check if the component was actually picked up.
Perform [Solution] in $a610.
$a633 There isn’t a bright(%d) pixel on the first(left side)lead of lower lead group.
[Problem]
The lead was not recognized when recognizing the component lead .
The component was not picked up actually.
Lighting level was setup too dark.
The component size was inputted incorrectly.
[Solution]
The component size was inputted incorrectly.
Perform [Solution] in $a610.
$a634 There isn’t bright(%d) pixel on the first(upper side)lead of right lead group.
[Problem]
The lead was not recognized when recognizing the component lead.
The component was not picked up actually.
Lighting level was setup too dark.
The component size was inputted incorrectly.
[Solution]
Check if the component was actually picked up.
Perform [Solution] in $a610.
$a635 There isn’t boundary(%d) at the first(left side) upper lead of lead group.
[Problem]
The lead was not recognized when recognizing lead of the component first.
The component was not picked up actually.
Lighting level was setup too dark or too bright.