DECAN_S2_Trouble(Eng_Ver4.2).pdf - 第197页

在线预览 DECAN_S2_Trouble(Eng_Ver4.2).pdf PDF 文档。

1-174

Advanced Chip Shooter DECAN S2 Troubleshooting Guide

1.4.16. Internal data related errors (Exception Error + OS Error) [$f000~$ffff]

$f800~$fb12An error occurred due to internal S/W problem. [MPU_STOP LEVEL]

[Problem]

 Internal S/W problem.

[Solution]

 Turn off power to the machine in the usual way. Wait 5 seconds, turn back on and

reboot the system.

$fb22 An object was detected by the front area sensor. [WARNING LEVEL]

$fb22 An object was detected by the rear area sensor. [WARNING LEVEL]

[Problem]

 Object was detected by the front (rear) sensor in an unsafe situation.

[Solution]

 Check the operation state of the safety sensor.

 Remove the object detected by the safety sensor.

$ff00 Cannot start production. [WARNING LEVEL]

[Problem]

 The machine driving motor was not homed.

 In the case of the docking cart machine, an error occurs due to defective clamping,

vision communication error, etc.

[Solution]

 Perform homing of the machine driving motor.

 Clamp the docking cart properly.

 Check the state of communication with the vision system by performing the functions

of Outline, Test, Pickup, etc. using the part information registered in the ‘Part Edit’

dialog box.

 Despite such checks and measures, if the problem occurs again, contact our designated

C/S and local agent.