DECAN_S2_Trouble(Eng_Ver4.2).pdf - 第27页

1-5 System Messages of the MMI and Solutions  When parts are picked up prope rly - Part recognition error [Refer to Section 1.2.1.2 ] Cause De scription Remark s Failed to output the images t aken by the camera .Defecti…

1-4

Advanced Chip Shooter DECAN S2 Troubleshooting Guide

Incorrect feeder base adjustment E0127

Part wear/distortion in the feeder E0128

Sprocket, ratchet, etc., are contaminated with

foreign materials.

E0129

Incorrect setup of the part supply position

according to tray shape and part

characteristics

E0130

Incorrect setup of Z and Pick Z values E0131

Foreign materials in the feeder base slot and

clamp

E0132

Incorr

ect Z offset setup E0133

Z Offset change E0134

Problem with

Nozzle

Standard nozzle not used E0140

Damaged nozzle tip, abnormal nozzle spring

tension

E0141

Insufficient nozzle maintenance E0142

Use of nozzle unsuitable for the part E0143

A number of odd

shaped materials

have dropped

Vacuum check setup error E0150

A part dump error

occurred.

Parts are not dumped properly due to incorrect

blow pressure setup

E0160

Cause Description Remarks

1-5

System Messages of the MMI and Solutions

 When parts are picked up properly - Part recognition error [Refer to Section

1.2.1.2]

Cause Description Remarks

Failed to output the

images taken by the

camera

.Defective fly camera or fix camera

.Defective fly camera I/F cable or defective

stage CAM 1 and 2 cables and connections

.Defective Fly Camera PW Sync Exit Cable

and connection

.Defective vision board

.Defective vision I/F board

.Defective camera I/O board (total

destruction of internal chips by fire)

.Defective power supply

.Defective vision board I

F cable and

connection

E0200

Damaged image from

the camera

Unclear image from the

camera

.Defective Fly Cam Sig Ext cable or Fix Cam

signal cable and connection

.Defective camera focus

.Contaminated camera lens and foreign

material on the lens

.Camera dip switch setup error

E0201

Vision processing

timeout /

Failed to recognize the

vision board

.Defective Vision board connection

.Defective SBC

.Defective vision

board

.Defective backplane board

.Damaged vision board driver file due to

infection by virus

E0202

Damage to the mirror .Scratch to the mirror

.Damaged mirror

.Mirror contaminated with foreign material

E0203

Part data registration

error

.Part recognition data registration error

.Recognition parameter setup error

.Illumination setup error

E0204

Defective part The part size is different from that of the

recogniti

on data of the registered part due to

a defective part

E0205

1-6

Advanced Chip Shooter DECAN S2 Troubleshooting Guide

Camera recognition

timeout error / Vision

processing timeout

error

.Defective vision board

.Defective Vision board connection

E0206

Fiducial camera noise

(Occurrence of

distorted image, half

image, overlapped

image, etc.)

.Defective Fiducial Camera cable

connection

.Defective fiducial camera

.Defective vision board I/F

E0207

Defective camera

assembling

The

camera recognition area is not located

at the part center but slightly offset in the X-

axis or Y-axis direction

E0208

The image from the

camera is dark

Abnormal illumination

brightness

.Defective camera illumination board

(Defective outer illumination board)

.Defective head illumination board

.The illumination LEDs turn on and off

repeatedly due to defective contact of the

cable related to the lighting

ight mapping error

E0209

Contaminated nozzle E0211

Defective recognition

of 'Ref' mark on the

head

Contaminated 'Ref' mark on the head E0212

Cause Description Remarks