88192278-01-19 Installation Master.pdf - 第183页
POWER UP SEQUENCE MACHINE POWER UP SEQU ENCE Chapter Issue 10, Nov 19 Installation Manual 5.7 6. Using the drop down box, select th e appropriate time zone. 7. Select X (close) . 8. Select Start on the taskbar . NOTE Ret…
POWER UP SEQUENCE
MACHINE POWER UP SEQUENCE
5.6 Installation Manual Chapter Issue 10, Nov 19
3. Select Change.
4. Set the correct date and time using the drop down arrows.
5. Select Change.
POWER UP SEQUENCE
MACHINE POWER UP SEQUENCE
Chapter Issue 10, Nov 19 Installation Manual 5.7
6. Using the drop down box, select the appropriate time zone.
7. Select X (close).
8. Select Start on the taskbar.
NOTE
Return the Windows login to the Operator account.
9. Select DEK Printer Software.
10. Press the System button.
POWER UP SEQUENCE
MACHINE POWER UP SEQUENCE
5.8 Installation Manual Chapter Issue 10, Nov 19
E Stop Loop
Operation
Carry out the following procedure for E Stop loop operation check:
1. Press the E Stop button. The Restore System Power window is displayed.
2. Reset the E Stop by turning the E Stop button clockwise until it unlatches.
3. Press the System button when prompted.
4. Open the printhead cover. The Machine Operation Suspended - Cover
Open window is displayed.
5. Close the printhead cover.
6. Press the System button when prompted.
Cover Open
Operation
1. After initialisation, open the printhead cover. The open cover page is dis-
played.
2. Close the printhead cover.
3. Press the System button to check that system power is restored.
Screen Cleaner Function Check
CAUTION
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COMPLY WITH
LOCAL ENVIRONMENTAL GUIDELINES. ASM RECOMMEND USING SOLVENTS
THAT ARE ENVIRONMENTALLY FRIENDLY, IE CFC FREE AND WATER BASED.
SOLVENTS USED MUST HAVE FAST EVAPORATION RATES AND FLASHPOINT
SPECIFICATIONS GREATER THAN 39ºC.
WARNING
SOLVENT SPRAY. THE UNDER STENCIL CLEANER SPRAYS A FINE JET OF
SOLVENT SOLUTION ON TO THE CLEANER. APPROVED PROTECTIVE
CLOTHING SHOULD BE WORN.
CAUTION
PRINT MEDIUM AND SOLVENTS. WHEN USING OR HANDLING ANY PRINT
MEDIUM OR SOLVENT FORMULATION THE MANUFACTURERS’ SAFETY DATA
SHEETS MUST BE STRICTLY ADHERED TO.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
NOTE
If the Under Stencil Cleaner has not been used for lengthy periods, refer to
Technical Bulletin TB 329 to complete the cleaning regime for the spray bar.