88192278-01-19 Installation Master.pdf - 第44页

COVERS PRINTER COVERS 2.10 Installation Manual Chapter Issue 12, Feb 18 2. Using a cross head screwdriver , release the two fasteners that secure the side panel to the cover fr ame. 3. Lift the side panel upwards to clea…

COVERS

PRINTER COVERS

Chapter Issue 12, Feb 18 Installation Manual 2.9

Front Corner Panels To remove the front corner panels, carry out the following:

1. Remove the front panel.

2. Remove the corresponding upper side panel (as detailed previously).

3. Release the quarter-turn fastener that secures the corner panel.

4. Lift the corner panel upwards to disconnect the panel from the side panel

and the guide pins that locate the panel to the printer frame.

5. Repeat Steps 2 to 4 for the other corner panel, if required.

Rear Corner Panels To remove the rear corner panels, carry out the following:

1. Remove the corresponding upper side panel (as detailed previously).

2. Release the quarter-turn fastener that secures the corner panel.

3. Lift the corner panel upwards to disconnect the panel from the side panel

and the guide pins that locate the panel to the printer frame.

4. Repeat Steps 1 to 3 for the other corner panel, if required.

Side Panels To remove the side panels, carry out the following:

1. Remove both corresponding corner panels (as detailed previously).

Front Corner

Panel Quarter-

Turn Fastener

Front Corner

Panel Quarter-

Turn Fastener

Rear Corner

Panel Quarter-

Turn Fastener

Rear Corner

Panel Quarter-

Turn Fastener

COVERS

PRINTER COVERS

2.10 Installation Manual Chapter Issue 12, Feb 18

2. Using a cross head screwdriver, release the two fasteners that secure the

side panel to the cover frame.

3. Lift the side panel upwards to clear the two guide pins that locate the panel

to the printer frame.

View on right Side of Printer

1 Cover Frame

2 Main Frame

3 Side Panel Securing Fasteners

COVERS

PRINTER COVERS

Chapter Issue 12, Feb 18 Installation Manual 2.11

Type 2 Covers In order to protect personnel and prevent damage to the printer, 10 covers are

fitted to the printer.

The sliding cover, the rear printhead cover and two upper side panels which

house the control switches protect the upper part of the printer. The four corner

panels, front and rear panels, safety covers and the front and rear side panels

protect the lower part of the printer.

NOTE

Some of the covers can only be removed in a specific order due to the covers

interlocking with each other.

Item Description Item Description

1 Rear Printhead Cover 7 Front Side Panel (2 positions)

2 Sliding Cover 8 Front Panel

3 Right Hand Upper Side Panel 9 Front Corner Panel (2 positions)

4 Rear Corner Panel (2 positions) 10 Left Hand Upper Side Panel

5 Safety Cover (2 positions) 11 Rear Panel

6 Rear Side Panel (2 positions)

Front Left Quarter View