D-serie level 1 EN.pdf - 第14页
General Information Room for Your Sketches and Notes Course Contents S tudent Guide Advanced Level 1 SIPLACE D-Serie s General Informat ion EN 05/2007 1-6
General Information
Course Contents Room for Your Sketches and Notes
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 General Information
1-5
General Information
Room for Your Sketches and Notes Course Contents
Student Guide Advanced Level 1 SIPLACE D-Series
General Information EN 05/2007
1-6
Operational Safety
Safety of Operators and Other Persons Safety Instructions
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 Operational Safety
2-1
2 Operational Safety
2.1 Safety Instructions
Any staff working on the machine must be familiar with the safety instructions in this user manual and
observe these at all times.
The following safety instructions are an excerpt from Chapter 1 "Operational Safety" of the SIPLACE
user manual.
2.1.1 Safety of Operators and Other Persons
Machine operators must only carry out work for which they have been adequately trained and with which
they are totally familiar.
2.1.2 Safety of Plants and Equipment
Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
The stations must always be set up, retooled and maintained by appropriately trained personnel.
Only use original spare arts and authorized accessories from Siemens AG. The use of other parts
will affect safety and will invalidate the liability for any consequential damage.
Do not make modifications to the safety equipment. Never bridge protective switches or remove
protective devices.
2.2 Warning Labels
WARNING:
The system is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels.
X Switch off at the main switch and disconnect the placement system from the power supply
before carrying out any work on live components.
X Lock the machine.
X There is a risk of death, severe injury and/or considerable damage to equipment if these
instructions are not followed.
ATTENTION: Observe all warning labels!
Observe the warning labels during the training course! These are explained in detail in the
operating manual – warning signs chapter of the relevant machine.