D-serie level 1 EN.pdf - 第142页
Component Handling Room for Your Sketches and Notes Optional Extension on the COT S tuden t Guide Advanced Level 1 SIPLACE D-Series Component Ha ndling EN 05/2007 8-12 8.4 Room for Y our Sketches and Notes
Component Handling
Optional Extension on the COT S Feeder Modules
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 Component Handling
8-11
8.2.1.5 Additional Communication unit for splice detection
8.3 S Feeder Modules
8-7: Additional Communication unit for splice detection
An additional communication unit for the option
Traceability with splice detection is necessary.
The splice sensors on the communication unit
inform the station software when a new
component lot (reel) is spliced on. This sets the
new fill level for this component automatically.
Legend
1. The additional communication unit is screwed
into place, together with the changeover table
communication unit.
NOTE: SCMC 604
SC/MC 604 alters the feeder function for the components.
The changeover table controller activates the conveyor process just before access to the feeder
track is needed. This has the following benefits:
X Components are not left exposed and the feeders can be removed from the machine without
component loss.
X Should the cutting procedure tug slightly at the empty tape, this will no longer cause lighter
components to jump because the components remain covered until just before pickup.
NOTE:
Please note that the changeover table surfaces must always be kept clean and free of
components before the feeder modules are inserted.
NOTE:
Please note that the changeover table contact surfaces must always be kept clean and free of
components before the changeover tables are inserted.
This helps prevent pickup errors and unnecessary calibration runs.
Component Handling
Room for Your Sketches and Notes Optional Extension on the COT
Student Guide Advanced Level 1 SIPLACE D-Series
Component Handling EN 05/2007
8-12
8.4 Room for Your Sketches and Notes
Component Handling
Optional Extension on the COT Room for Your Sketches and Notes
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 Component Handling
8-13