D-serie level 1 EN.pdf - 第37页
Overview Axis Unit and Computer Unit Assemblies S tude nt Guide Advanced Level 1 SIPLACE D-Series EN 05/2007 Overview 3-13 3.4.3.3 Axis Unit The axis unit contain s the serv o boards, axis controller boards, power supply…
Overview
Assemblies Axis Unit and Computer Unit
Student Guide Advanced Level 1 SIPLACE D-Series
Overview EN 05/2007
3-12
3.4.3.2 Control Unit Comparison D1 to D4
The control units can be accessed from the left machine side, under the PCB input conveyor belt:
Designation D4 D3 D2 D1
Station computer Box PC 627 PC C086 unit
(from 2007 box PC)
Box PC 627
Operating system Windows XP
SC/MC 602.01 / 603.01 603.01
Machine controller SIMATIC
MicroboxPC 420
PC C086 unit
(from 2007 box PC)
SIMATIC
MicroboxPC 420
SIMATIC
MicroboxPC 420
Operating system 602: RMOS / 603: Windows XP Windows XP
Shutdown -
operator
Regular shutdown of SC / SITEST desk
Shutdown
administrator
Shutdown pushup - start button menu
Programs
/
SIPLACE
/
Shutdown ALL
External DVD drive Yes for MC with
Windows installation
Yes for MC with Windows installation
USB connections 4 in SC / 7-fold USB
hub for touchscreen
and keyboard
4 in box PC / 4-fold
USB hub for
touchscreen and
keyboard
4 in SC / 7(4)-fold USB hub for touchscreen
and keyboard
ATTENTION:
Do not switch off!
NEVER switch off during the startup (boot) phase. WINDOWS XP might be unable to restart at
the MC. In this case, you would need to reinstall WINDOWS XP!
Overview
Axis Unit and Computer Unit Assemblies
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 Overview
3-13
3.4.3.3 Axis Unit
The axis unit contains the servo boards, axis controller boards, power supply (+/-15V,+5V) and the
ballast circuit (only in axis unit 2). The flexible axis unit is equipped with the correct servo and axis boards
for the machine type and head configuration concerned (with C&P12).
Overview of axis unit
D4 machine axis unit in PA1 for gantries 1 and 4 axis unit in PA2 for gantries 2 and 3
Axis Unit SIPLACE D4
3-7: Axis Unit
The axis unit is located near the PCB input or output.
NOTE:
The two power pack assemblies have a different version from 01/2007 and replace the
assemblies shown.
Overview
Assemblies Axis Unit and Computer Unit
Student Guide Advanced Level 1 SIPLACE D-Series
Overview EN 05/2007
3-14
Servo Positions D4/D2
Axis Controller Boards
3-8: Axis controller boards
Servo positions for
each level
D4 D2
C&P type
PA1
C&P type
PA2
C&P type P&P type (next
generation)
x Gantry 1 Gantry 2 Gantry 1 Gantry 1
A9 Star 1 Star 2 Star 1 Z-axis 1
A11 Z-axis 1 Z-axis 2 Z-axis 1 --
Y Gantry 1 Gantry 2 Gantry 1 Gantry 1
A13 -- -- -- D axis 1
A15 -- -- -- --
x Gantry 4 Gantry 3 Gantry 2 Gantry 2
A10 Star 4 Star 3 Star 2 Z-axis 2
A12 Z-axis 4 Z-axis 3 Z-axis 2 --
Y Gantry 4 Gantry 3 Gantry 2 Gantry 2
A14 DP axis G1 DP axis G2 DP axis G1 D axis 2
A16 DP axis G4 DP axis G3 DP axis G2 --
Servo Assignment D4/D2