D-serie level 1 EN.pdf - 第192页
SIPLACE Measuring Tools Belt Tension Measuring Device [00326015-01] Scope of Delivery S tuden t Guide Advanced Level 1 SIPLACE D-Series SIPLACE Measuring T o ols EN 05/2007 11 - 8 1 1.8 Belt T ension Measuring Device [00…
SIPLACE Measuring Tools
Scope of Delivery Location Tester
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 SIPLACE Measuring Tools
11-7
11.6 Location Tester
11.7 Power Pack for Star Installation
Location tester
Application:
The location tester is used to check the
connections for the feeder modules at the
communication unit of the changeover table.
Power pack adjustment aid for star
installation on DLM1 C&P head
Item No.: 00353277-01
Application:
The power pack is used as an adjustment aid
for installation of the star (C&P placement
head).
SIPLACE Measuring Tools
Belt Tension Measuring Device [00326015-01] Scope of Delivery
Student Guide Advanced Level 1 SIPLACE D-Series
SIPLACE Measuring Tools EN 05/2007
11-8
11.8 Belt Tension Measuring Device [00326015-01]
11.9 SIPLACE Compressed Air Testing Device [00311487-01]
Belt tension device
Application:
This is used for measuring the belt tension
(toothed belts) in the machine.
SIPLACE compressed air testing device
GDH 14
Application:
The compressed air testing device is used to
set the air blast at the placement heads C&P6
and C&P12 for SIPLACE placement
machines.
SIPLACE Measuring Tools
Scope of Delivery Calibration Tools for Vision Systems
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 SIPLACE Measuring Tools
11-9
11.10 Calibration Tools for Vision Systems
11.11 Z-End Stopper Star Gauge for C&P6/12 [03019865-01]
Application:
The calibration tool [003010565-xx] is used to
calibrate the C&P6/12 placement heads in the
D/X and HF machines.
A second calibration tool is available for the
C&P20 head of the X-series:
Calibration tool [03034148-01] version for
C&P20 head (for component camera system
type 23)
Another calibration tool is available for
machines with 4xx software:
Calibration tool [00316308-03] version II
transparent
The various calibration tools for the different
machine types are listed here for the sake of
completeness.
Z-end stopper star gauge for C&P6 and
C&P12
Application:
The gauge is used to set the end stopper of the
C&P head Z-axis.