1OM-1003-007.pdf - 第125页

• • • • • Intentional Component Replenishment during Automatic Operation (1) Press the [STOP] button on the front operation panel to stop the machine temporarily . (2) Press the [ALL] button (entitled "ZERO") i…

1.4 Temporary Stop and Restart of Automatic

Operation

1.4.1 Replenishment of Components and P.C.B.’s

There will be two cases of component supply replenishment during au-

tomatic operation - Component Replenishment with Machine in Short

of Components and Intentional Component Replenishment.

Correct countermeasures are also required when the machine is short

of P.C.B.’s.

••

• Component Shortage Mode

When a component shortage error occurs during automatic opera-

tion, an error alarm is issued and the machine stops.

In this case, follow the steps below to replenish components and re-

start the automatic operation.

(1) Press the [RESET] button to cancel the error alarm.

(2) Open the feeder work area safety door and detach the tape feeder.

(3) Install the tape feeder loaded with components.

Refer to the instruction manual of the tape feeders for attach-

ment and detachment of the tape feeders.

The tape feeders should be seated securely.

Otherwise, they may collide with the feeder installa-

tion error detection sensors or pick-up errors will oc-

cur.

(4) After the replacement of the tape feeder, close the feeder work

area safety door and press the [FEEDER READY] button on the

pertinent side. Confirm that the "AUTO OPN." window is active on

the touch screen and press the [START] button. The automatic op-

eration re-starts.

1.4 Temporary Stop and Restart of Automatic Operation

CAUTION

0412-002 3-13 AIL01EOPP

Note

••

• Intentional Component Replenishment during Automatic

Operation

(1) Press the [STOP] button on the front operation panel to stop the

machine temporarily.

(2) Press the [ALL] button (entitled "ZERO") in the "Control Switch"

group box of the "AUTO OPN." window (submenu) to zero the de-

vices.

Fig. 1C22

(3) Open the feeder work area safety door and detach the tape feeder

in component shortage.

(4) Load the tape feeder with new components and install it on the

feeder carriage.

(5) Press one of the buttons (entitled "FEEDER READY") related to

the pertinent tape feeder in the "Control Switch" group box in the

"AUTO OPN." submenu window.

(6) Close the feeder work area safety door and press the [FEEDER

READY] and [START] buttons. The automatic operation re-starts.

1.4 Temporary Stop and Restart of Automatic Operation

0305-001 3-14 AIL01EOPP

••

• Countermeasures against Shortage of P.C.B.’s

When the machine gets short of P.C.B.’s during automatic opera-

tion, the input machine issues an error alarm or the machine stops

automatically.

When the input machine has issued an error alarm, follow the step

below.

(1) Replenish the input machine with P.C.B.’s and re-start the auto-

matic operation.

When the machine has stopped automatically, it indicates the fol-

lowing.

(1) The input machine has stopped automatically in a normal condi-

tion.

In normal cases, it means that the production is completed.

1.4 Temporary Stop and Restart of Automatic Operation

0305-001 3-15 AIL01EOPP