00198615-04_UM_IPC-HERMES-9852-V1.2_DE_EN_ZH.pdf - 第26页
3 Configuration 3.1 Connection configuration in the LAN 26 Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 Deleting To delete the configured connections proceed in the reverse order an…
3 Configuration
3.1 Connection configuration in the LAN
Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 25
► The result under QoS -> Access Control Lists -> Summary looks like:
► Go to QoS -> Access Control Lists -> Interfaces and add the access control list (ACL) to
the respective interface, e.g. Interface = 2, Sequence Number = e.g. 1 and ACL Identifier =
100.
ð Before activating the ACL, make sure that you do not apply it to all interfaces and that
there is another interface which can be used for changing the configuration if something
has gone wrong.
► Test the applied configuration.
► If everything is working properly, you can save the configuration.
Creating a connection between placement machine and conveyor works in an analogous way as
the configuration of the connection between stacker and printer.
NOTICE
Router in the network infrastructure
Ensure that the router is integrated correctly into your network infrastructure!
3 Configuration
3.1 Connection configuration in the LAN
26 Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020
Deleting
To delete the configured connections proceed in the reverse order and delete the created entries.
3.1.6 Using another router
If another router shall be used to establish Hermes connections between the SIPLACE LAN and
the shop floor LAN, which is possible, please consider the guidelines regarding port forwarding
provided by the vendor of the selected router.
3 Configuration
3.2 Connection configuration in SIPLACE Pro
Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 27
3.2 Connection configuration in SIPLACE Pro
NOTICE
System requirements
In combination with station software versions from 711.1, you can configure the connec-
tions in SIPLACE Pro. With station software 710.3, you cannot configure the connections in
SIPLACE Pro.
► In SIPLACE Pro, open the line editor.
► Select the IPC-HERMES-9852 tab.
► Select the individual stations in the line and configure the connections for all of them.
ð The settings of the previous machine are displayed and you can make the settings for the
next machine.
Editing field: From previous machine
Field Value/Meaning
On Shows if a port number from the previous machine is present.
Port The port number of the previous machine (placement machine, printer,
general line device or inspection system) is read out from the configura-
tion and displayed here.
Interface ID The Interface ID of the previous third party party device (no SIPLACE
station) is displayed.
► Configure the connection to the next machine.