00198615-04_UM_IPC-HERMES-9852-V1.2_DE_EN_ZH.pdf - 第28页
3 Configuration 3.2 Connection configuration in SIPLACE Pro 28 Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 Editing field: To the next machine Field Value/Meaning Use IPC-HER- MES-9…
3 Configuration
3.2 Connection configuration in SIPLACE Pro
Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 27
3.2 Connection configuration in SIPLACE Pro
NOTICE
System requirements
In combination with station software versions from 711.1, you can configure the connec-
tions in SIPLACE Pro. With station software 710.3, you cannot configure the connections in
SIPLACE Pro.
► In SIPLACE Pro, open the line editor.
► Select the IPC-HERMES-9852 tab.
► Select the individual stations in the line and configure the connections for all of them.
ð The settings of the previous machine are displayed and you can make the settings for the
next machine.
Editing field: From previous machine
Field Value/Meaning
On Shows if a port number from the previous machine is present.
Port The port number of the previous machine (placement machine, printer,
general line device or inspection system) is read out from the configura-
tion and displayed here.
Interface ID The Interface ID of the previous third party party device (no SIPLACE
station) is displayed.
► Configure the connection to the next machine.
3 Configuration
3.2 Connection configuration in SIPLACE Pro
28 Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020
Editing field: To the next machine
Field Value/Meaning
Use IPC-HER-
MES-9852
Enabled:
Instead of the IPC SMEMA interface, IPC-HERMES-9852 is used for the
connection to the next machine in the line. At the next machine in the
line, this configuration is displayed in the From previous machine field
and cannot be edited there.
Disabled:
The IPC SMEMA interface is used for the connection to the next
machine in the line.
Use default ports Enable this option if you want to use the default ports.
Disabled:
Allows entering individual port numbers for the respective conveyor lane.
Port 2 - Left lane
50102 - Port number for the left conveyor lane.
Interface ID The Interface ID for third party devices with additional conveyor lanes
(including return transport) that are not the main transport direction
through the line. The Interface ID is used to identify the input or output
side of special devices (no SIPLACE stations).
Default: No value is entered for the Interface ID.
Port 1 - Right lane
50101 - Port number for the right conveyor lane.
Interface ID The Interface ID for third party devices with additional conveyor lanes
(including return transport) that are not the main transport direction
through the line. The Interface ID is used to identify the input or output
side of special devices (no SIPLACE stations).
Default: No value is entered for the Interface ID.
3 Configuration
3.3 Configuring the connections at the SIPLACE station
Administrator Guide / Administrator Handbuch / 管理员指南 IPC-HERMES-9852 - V1.2 05/2020 29
3.3 Configuring the connections at the SIPLACE station
The upstream system from which the board data is received must be defined for each SIPLACE
station in the line. In other words, the upstream system must be defined in terms of the IP address
or the host name and port number. This connection configuration is made in SIPLACE Pro and can
be viewed here or modified for the individual station.
► In the toolbar, click Service (1) and select IPC-HERMES-9852.
ð The IPC-HERMES-9852 – Configuration view is displayed.
Default setting
The Ignore configuration requests option is disabled. Irrespective of the settings that are made
here, the configuration predefined in SIPLACE Pro is applied.
Modifying predefined connection settings (optional)
► Activate the Ignore configuration requests option.
ð The configuration that is predefined in SIPLACE Pro is overwritten by the settings for host
and port that are made here.
A peer on the upstream machine must be defined for each conveyor belt of the input section to al-
low information to be exchanged using IPC-HERMES-9852.