DECAN_S1_Troubleshooting_Guide(Eng_Ver1.3)_Print_Web.pdf - 第114页
1-90 Next Generation, Multi-Functional Plac er DECAN S1 Troubleshooting Guide Check on the ‘Feede r’ dialog box of the PCB Edit menu if the corresponding part is setup at the required feeder . Defined feeder types ar…
1-89
System Messages of the MMI and Solutions
Occurs when using undefined feeder type.
[Solution]
Turn off the Buzzer by pressing the “STOP” button.
Switch the machine to “IDLE” mode by pressing the “RESET” button.
Check on the ‘Part’ dialog box of the PCB Edit menu if the feeder type of
corresponding part is correctly setup, If not correctly setup, click the <Edit> button
with the component being selected.
Then, the component editor dialog box is executed. Click <Common Data> here, and
setup the feeder again.
1-90
Next Generation, Multi-Functional Placer DECAN S1 Troubleshooting Guide
Check on the ‘Feeder’ dialog box of the PCB Edit menu if the corresponding part is
setup at the required feeder.
Defined feeder types are feeder base(tape), stick unit and tray unit.
If trouble continues to occur, please contact the C/S company designated by Hanwha
Precision Machinery Co., Ltd. or the local agent.
$5004 Production is stopped without finishing part placement on the PCB. [WARNING ??]
[Problem]
A PCB is stuck to the conveyor.
1-91
System Messages of the MMI and Solutions
Production is stopped due to an unexpected error.
[Solution]
Save the log of the machine and send it to a CS engineer in our company for proper
measures.
$5008 Cannot start production since the machine is stopped. [WARNING LEVEL]
[Problem]
$5008Cannot start production since the machine is stopped. [WARNING LEVEL]
[Solution]
Stop the automatic production of the machine completely, and check if the machine is
at ‘Idle’ state. Then try the automatic production again.
Despite such checks and measures, if the problem occurs again, contact our designated
C/S and local agent.
$5009 Cannot start production since the machine is in operation. [WARNING LEVEL]
[Problem]
When the machine was requested to start automatic production during automatic
production.
[Solution]
Take measures same as those against the error code “$5008”.
$500A Cannot start production since the machine is stopped. [WARNING LEVEL]
[Problem]
The machine was requested to start production while the machine was in the course of
stopping automatic production.
[Solution]
Take measures same as those against the error code “$5008”.
$500B Cannot start production since the machine is executing MMI command. [WARNING
LEVEL]
[Problem]
The machine received a command for automatic production while simultaneously
executing the previous command.
[Solution]
Take measures same as those against the error code “$5008”.
$5011 Empty slot in feeder base. [WARNING LEVEL]
[Problem]