DECAN_S1_Troubleshooting_Guide(Eng_Ver1.3)_Print_Web.pdf - 第22页
Next Generation, Multi-Functional Plac er DECAN S1 Troubleshooting Guide xii About virus protection For the safe use of the machine, the machine system shall be maintained normally through virus protection. Basic items…
Preface
xi
About Warranty
The warranty is issued to cover the following machine faults and malfunctions.
The warranty terms and conditions agreed to at the purchase of the product precedes
the general terms above.
What is covered by
the warranty
Hanwha Precision Machinery Co., LTD. provides free warranty
services within the warranty period if the product fails to operate
properly under normal operating conditions due to defective materials
or problems originating from the manufacturing process.
Time period of the
warranty
The term of this warranty shall expire for any of the following cases.
Warranty expires 24 months after shipment or 24 months after
installation.
However, if there is more than one term of expiration of the warranty
period, the terms that come later will be applied.
What is not
covered by the
warranty
Product warranty does not cover the following cases.
If the stored data is lost due to damage to the HDD or SSD
(regular backup is recommended.)
When data is damaged due to system malfunction or virus
infection due to the execution of a program not related to the
operation of the product
Natural changes over time or natural wear from the use of the
product (discoloration of paints or coats, wears on consumable
parts, etc.)
Sensory conditions that do not affect the quality and functions of
the product (operating noise from the controller or motor, etc.)
Defects due to ambient conditions (moisture, impurities, dust on
the machine, oil mist, etc.).
Malfunctions caused by misuse
Natural disasters such as earthquakes, storms, flooding, lightning,
accidents, or fire
Unauthorized modification of the product
Failure to back up the data stored in the machine.
When using non-genuine parts or accessories
Lack of proper repairs or maintenance work(Includes the use of
non-specified lubricants)
Adjustment of the product by unauthorized parties
Next Generation, Multi-Functional Placer DECAN S1 Troubleshooting Guide
xii
About virus protection
For the safe use of the machine, the machine system shall be maintained normally through
virus protection.
Basic items to be observed for virus protection are as follows:
Install the anti-virus program (TrusLine) provided by us so that any virus can be
treated by performing a virus check periodically. When installing the program,
contact our C/S or local agent.
Run the anti-virus program and check for viruses without fail before starting the
machine and preparing production. Running the anti-virus program during
production may affect the performance of the machine.
Update the anti-virus program engine periodically. Use a PC without a virus as an
update server when updating the anti-virus program engine for the machine
system.
For the corresponding PC, update the anti-virus program engine periodically
through the Internet and perform configuration in the ant-virus program to update
the anti-virus program engine of the machine by sharing the folder in which the
updated file is saved with the machine system.
When loading a PCB file or saving it in the system using storage media including
USBs, perform an anti-virus check first on the corresponding storage media and
check for any problems.
When using a shared folder in the machine system as necessary, set the password
for the shared folder without fail.
1-xiii
About This Manual
Composition of this Manual
The manual for this machine is comprised as follows.
Handbook
Operation Handbook
Describes briefly a series of processes that is performed by the operator.
Maintenance Handbook
Describes briefly basic points related to maintenance of the machine;
Preparation for maintenance, daily inspection, periodical inspection, cleaning
and lubrication method, definition of consumables including replacement time
and method.
Administrator’s Guide
Describes the program for PCB production or various system setups related to the
machine;User’s account administration and authority setup, board definition,
component registration, feeding device setup, step programming, optimization,
production setup, teaching and placement test, machine calibration, system setup,
machine diagnosis, utility menu setup and production information management
Troubleshooting Guide
Describes definition and the method used to take measures against the errors;
Describes definition and solution for error codes and the errors not defined
Technical Reference
Provides part information for the maintenance and various technical drawings.
Symbols other than safety marks used in this manual
The meanings of symbols used in this manual are as follows:
ReferenceReference indicates a part to be referred to.
Memo Describes useful information related to the text or definition of terms.