DECAN_S1_Troubleshooting_Guide(Eng_Ver1.3)_Print_Web.pdf - 第18页

Next Generation, Multi-Functional Plac er DECAN S1 Troubleshooting Guide viii Machine Name Plate It specifies the model name and serial number of the equipment, and basic equipment specifications. Check the pneumatic and…

Preface

vii

Check before service.

Remove power & air-source only for

authorized personnel.

As the current with high-voltage flows inside

the cover or in the area near the switch,

take precautions against electric shock.

Be sure to turn off the main switch in the

left-lower cover of the rear side before

maintenance.

Do not put a hand in during operation.

Part where this label is attached contains

moving parts, it is very dangerous if the user

disassembles any part or opens the cover

while operating.

Stop the machine before servicing.

Stop the machine before maintenance or

error troubleshooting.

Be careful when cleaning the cover.

Dip a clean ultra-fine fiber cloth in the

specified cleaning liquid, and wipe the

acrylic cover of the door gently using the

cloth.

The following actions may damage the anti-

static cover. For this reason, please handle

carefully.

 Cleaning using hydrogen carbonate,

ester, ketone, acid, strong alkali or

chemicals similar to these

 Cleaning by rubbing the acrylic cover

applying strong force with an ultra-fine

fiber cloth

Next Generation, Multi-Functional Placer DECAN S1 Troubleshooting Guide

viii

Machine Name Plate

It specifies the model name and serial

number of the equipment, and basic

equipment specifications.

Check the pneumatic and voltage

specifications specified on the nameplate

and operate the equipment in compliance

with the specifications.

Preface

 Internal Part of the Machine.

The following labels are attached on the rear part of this machine.

Figure1.3 Safety labels attached to the inside of the machine at the front

Do not touch the head assembly.

Be careful of electric shock.

Turn off the main switch before performing

maintenance since fatal personnel injury

may occur. Be careful of the residual

current.