SWIA_503.04_EN.pdf - 第6页
L&A I NSTA LLATION M ANUAL L INE C OMPUTER LCL 50 3.04 REREQUISITES P 3. Prerequisites Hardware: Linux: Scenic 800 Scenic xL Econel 20 Econel 30 Econel 40 Econel 50 Memory: 256 MB RAM recommend Operating system: Linu…
INSTALLATION MANUAL LINE COMPUTER LCL 503.04 L&A
ENERAL G
1. General
Version description for:
Software: Line computer software
Version: Linux LRL.503.04 Installation Manual V503
2. Scope of delivery
Languages: German, English, French, Italian, Japanese
Linux: Line computer software: LRL. 503.04 Installation Manual V503
Item no.: 00370500-07 (Full version / incl. Operation System)
CD: 1 copy of LC software Linux LCL. 503.04
NOTE
The Linux version of the line computer only runs correctly with the SuSE
distribution produced by Siemens L&A.
The original SuSE installation package as supplied as part of the line
computer SuSE distribution must not be installed! It is only included in the
line computer SuSE distribution in order to fulfill the licensing requirements
Version description LC.503.04 E / D
Item No.: 00194608-01
03.03.2005 SUBJECT TO CHANGE WITHOUT PRIOR NOTICE L&A EA
R
UPERT-MAYER-STR. 44
P
AGE 5 / 75 SWIA_503.04_EN.DOC D-81359 MUNICH
L&A INSTALLATION MANUAL LINE COMPUTER LCL 503.04
REREQUISITES P
3. Prerequisites
Hardware:
Linux:
Scenic 800
Scenic xL
Econel 20
Econel 30
Econel 40
Econel 50
Memory: 256 MB RAM recommend
Operating system:
Linux:
SuSE-LINUX 9.0 (LRL.503.04)
Station software:
HS180 SRHS.405.xx
Siplace 80G2 SR.11.xx/SR.010.xx/SR.09xx
Siplace 80S-15 SR.010.xx/SR.09xx
Siplace 80S-20 SR.403/405/406/407.xx
Siplace 80S-23 SR.405/406/407.xx
Siplace 80F SR.010.xx/SR.09xx
Siplace 80F4 SR.403/405/406/407.xx
Siplace 80F5 SR.403/405/406/407.xx
Siplace 80F5HM SR.403/405/406/407.xx
Siplace 80HS50 SR.501.02/03
SR.502.xx
SR.503.01
Siplace 80HS50P SR.503.xx
Siplace 80HS60 SR.503.xx
Siplace 80S25HM SR.502.xx
SR.503.01
Siplace 80S27HM SR.503.xx
Required hard disk capacity: 100 MB on «/u»
L&A EA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 03.03.2005
RUPERT-MAYER-STR. 44
D-81359 M
UNICH SWIA_503.04_EN.DOC PAGE 6 / 75
L&A INSTALLATION MANUAL LINE COMPUTER LCL 503.04
NSTALLATION UPGRADE INSTRUCTIONS I /
4. Installation/upgrade instructions
4.1 Definitions
4.1.1 Initial installation
At the start of initial installation there is no data on the hard disk. Following a query from the line
computer software, the installation program can also install sample master data on the hard disk.
The prerequisite for the line computer software installation is a correctly installed SuSE-LINUX 7.3 or
9.0 operating system.
4.1.2 Update
If the only difference between the new software version and the already installed version is the
revision level (e.g. LCL.503.01 ⇒ LCL.503.02), this is referred to as an update. When an update is
performed, the master data is retained.
4.1.3 Upgrade
If the new software differs from the already installed software by its version designation (e.g. SCO
OpenServer; LCU.502.03 ⇒ LCU.503.01), this is referred to as an upgrade. When an upgrade is
performed, the master data is retained and, if required, automatically converted to the new data
format.
4.1.4 Migration from SCO to Linux
Before installing the LCL software, all the data which is to be reused must be backed up. The master
data can be reused after SuSE-LINUX 7.3 / 9.0 and LCL.503.01-LCL.503.04 have been installed.
The backup tool «SDH_Backup» cannot be used for Linux.
4.1.5 Installation with central data storage
During the installation procedure, only data on the local disk is manipulated. Therefore, the following
procedure is to be observed by customers with central data storage.
Copy central GF-/RI library from the central computer to the local line computer under UNIX.
Perform the installation.
Copy GF-/RI-/ST library from the local line computer to the central computer.
L&A EA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 03.03.2005
RUPERT-MAYER-STR. 44
D-81359 M
UNICH SWIA_503.04_EN.DOC PAGE 7 / 75