SWIA_503.04_EN.pdf - 第7页

L&A I NSTA LLATION M ANUAL L INE C OMPUTER LCL 50 3.04 NSTALLATION UPGRADE INSTRUCTION S I / 4. Inst allation/upgrade instructions 4.1 Definitions 4.1.1 Initial installation At the start of initial ins tallation ther…

100%1 / 75
L&A INSTALLATION MANUAL LINE COMPUTER LCL 503.04
REREQUISITES P
3. Prerequisites
Hardware:
Linux:
Scenic 800
Scenic xL
Econel 20
Econel 30
Econel 40
Econel 50
Memory: 256 MB RAM recommend
Operating system:
Linux:
SuSE-LINUX 9.0 (LRL.503.04)
Station software:
HS180 SRHS.405.xx
Siplace 80G2 SR.11.xx/SR.010.xx/SR.09xx
Siplace 80S-15 SR.010.xx/SR.09xx
Siplace 80S-20 SR.403/405/406/407.xx
Siplace 80S-23 SR.405/406/407.xx
Siplace 80F SR.010.xx/SR.09xx
Siplace 80F4 SR.403/405/406/407.xx
Siplace 80F5 SR.403/405/406/407.xx
Siplace 80F5HM SR.403/405/406/407.xx
Siplace 80HS50 SR.501.02/03
SR.502.xx
SR.503.01
Siplace 80HS50P SR.503.xx
Siplace 80HS60 SR.503.xx
Siplace 80S25HM SR.502.xx
SR.503.01
Siplace 80S27HM SR.503.xx
Required hard disk capacity: 100 MB on «/u»
L&A EA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 03.03.2005
RUPERT-MAYER-STR. 44
D-81359 M
UNICH SWIA_503.04_EN.DOC PAGE 6 / 75
L&A INSTALLATION MANUAL LINE COMPUTER LCL 503.04
NSTALLATION UPGRADE INSTRUCTIONS I /
4. Installation/upgrade instructions
4.1 Definitions
4.1.1 Initial installation
At the start of initial installation there is no data on the hard disk. Following a query from the line
computer software, the installation program can also install sample master data on the hard disk.
The prerequisite for the line computer software installation is a correctly installed SuSE-LINUX 7.3 or
9.0 operating system.
4.1.2 Update
If the only difference between the new software version and the already installed version is the
revision level (e.g. LCL.503.01 ⇒ LCL.503.02), this is referred to as an update. When an update is
performed, the master data is retained.
4.1.3 Upgrade
If the new software differs from the already installed software by its version designation (e.g. SCO
OpenServer; LCU.502.03 ⇒ LCU.503.01), this is referred to as an upgrade. When an upgrade is
performed, the master data is retained and, if required, automatically converted to the new data
format.
4.1.4 Migration from SCO to Linux
Before installing the LCL software, all the data which is to be reused must be backed up. The master
data can be reused after SuSE-LINUX 7.3 / 9.0 and LCL.503.01-LCL.503.04 have been installed.
The backup tool «SDH_Backup» cannot be used for Linux.
4.1.5 Installation with central data storage
During the installation procedure, only data on the local disk is manipulated. Therefore, the following
procedure is to be observed by customers with central data storage.
Copy central GF-/RI library from the central computer to the local line computer under UNIX.
Perform the installation.
Copy GF-/RI-/ST library from the local line computer to the central computer.
L&A EA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 03.03.2005
RUPERT-MAYER-STR. 44
D-81359 M
UNICH SWIA_503.04_EN.DOC PAGE 7 / 75
L&A INSTALLATION MANUAL LINE COMPUTER LCL 503.04
NSTALLATION UPGRADE INSTRUCTIONS I /
4.1.6 Installing the SCO LCU CD under Linux
If the SCO line computer CD is read in on a Linux computer, the installation aborts with the message
«file not found».
L&A EA SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 03.03.2005
RUPERT-MAYER-STR. 44
D-81359 M
UNICH SWIA_503.04_EN.DOC PAGE 8 / 75