TSR2000-Series-Teaching-Pendant-User-Guide-V1.pdf - 第23页
23 9.12 How to Create an Elevate d Line (Bead) How to Cr eate a Mult iple Point Eleva ted Line Press tw ice The progr am ca n now be downloaded or edited further . Change t he move speed with the key When line start loca…
22
9.11 How to Create a Single Line (Bead)
Reference Section 9.2 and
9.24. From the Insert screen,
select option 2.
Change the move speed
with the key.
When line start location
is reached press
Press 5.
Use alphanumeric keys to
change the dispense speed
(pattern speed).
Press twice.
If “GO” is flashing, at
the top of the screen press
then press
Use alphanumeric keys to
move the line end location
and press
Press twice
(Optional) Use the
alphanumeric keys to select a
park location.
then
Select where the valve
should go to after dispensing.
Press
Press 2
Press 4
Press
This starts the dispensing
cycle.
To save, press
Use the alphanumeric keys
to change the retract speed,
retract height and feed
on/feed off delay.
Press
23
9.12 How to Create an Elevated Line (Bead)
How to Create a Multiple Point Elevated Line
Press twice
The program can now be
downloaded or edited
further.
Change the move speed
with the key
When line start location is
reached press
Use alphanumeric keys to
change the dispense speed
(pattern speed).
Press twice.
Use alphanumeric keys to
move the line end location
and press
Press twice
The program can now be
downloaded or edited
further.
If “GO” is flashing, at the
top of the screen press
then press
Press 5.
Line Start
Line End
Follow the instructions in
Section 9.16 for creating
a Polyline.
Reference Section 9.2 and
9.24 From the Insert screen,
select option 2.
Reference Section 9.2
and 9.24
From the Insert screen,
select option
Line Mid
Line End
Line Start
24
9.13 How to Create an Arc
Reference Section 9.2 and
9.24. From the Insert screen,
select option 9.
Change the move speed
with the key.
When arc start location
is reached press
Press 5.
Use alphanumeric keys to
change dispense speed
(pattern speed).
Press twice.
If “GO” is flashing at the
top of the screen press
then press
Use jog keys to move to
Arc mid-point location.
Press
Use jog keys to move to
Arc end-point location.
Press
.
Press twice.
Press
Press 4
To save, press
Starts the dispensing
cycle
Press 2
Select where the valve
should go to after dispensing.
Use the alphanumeric keys to
change the retract speed,
retract height and feed
on/feed off delay.
Press
(Optional) Use the
alphanumeric keys to select a
park location.
then