00198000-02_VD_709.1_DE_EN.pdf - 第31页
Station Software 709.1 / Version Descript ion Ausgabe 05/2016 E dition 31 5 Hardware S pecifications 5.1 Supported F eeder T ype s The following f eeders are supported by the 70 9.1 stati on software versi on: – 4 mm – 1…
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
30
4.13 Miscellaneous Improvements and Adaptions
Compatible mode: Complete
4.13.1 AutoLogOff functionality
– At the AutoLogOff time, the open dialog is automatically closed because access to the dialog is
no longer allowed. When closing a dialog, a Cancel action is automatically executed, changes
will not be saved.
– An independent timeout value has been introduced for the SIPLACE service AutoLogOff.
4.13.2 Message Bar
Detailed errors and errors are now displayed in a single message bar. The rules for determining the
top message in the stack remain, i.e.:
– Detailed errors have a higher stack level than errors.
– Detailed errors are sorted following the rule: "the sooner, the higher the stack level".
– Errors are sorted following the rule: "the sooner, the lower the stack level".
– Within the errors, the stack order is affected by the priority defined in the user message:"the
higher priority, the higher the stack level".
All messages are also displayed in a combo box. However, the errors do not offer direct navigation
to SIPLACE Vision dumps or online help, they can only be selected.
4.13.3 Table Symbol in Production View
In the Production view is displayed how the boards are moved in the machine. The tables are also
schematically displayed in this view. Up til now they could have two states: idle (green) and alarm
(red).
The tables are also displayed in the Setup view, but there they can have three states: idle (green),
warning (orange) and alarm (red as in the Production view).
For more consistency, the tables in the Production view now also have the warning state (orange).
4.13.4 Faster Calibration and Head Mapping
The segment offset calibration and head mapping have been speeded up by using the Z height of
the calibration tool and calibration tool pocket.
4.13.5 Enabling Pin1 Detection
The Pin1 detection option does not have to be enabled in the station software anymore but in
SIPLACE Pro. Please refer to the SIPLACE Pro 13.1 Software Version Description, item no.:
[00198005-xx].
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
31
5 Hardware Specifications
5.1 Supported Feeder Types
The following feeders are supported by the 709.1 station software version:
– 4 mm – 104 mm X-feeder
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– TrayStack Feeder AX (X4i S on location 2 and 3 only)
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML (TX-series only)
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
HanSan LED feeder
Top Engineering LED feeder
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE Multistick 60 AX
IPTE Multistick XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5/WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Splice sensor X-feeder
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
32
5.2 Camera Systems and Component Ranges
Detailed information on the used camera systems and component ranges for the placement heads
can be found in the respective machine specifications and/or User Manuals of the placement
machines.