00198000-02_VD_709.1_DE_EN.pdf - 第34页
Station Software 709.1 / Version Descript ion Ausgabe 05/2016 E dition 34 6.4 SIPLACE Traceability Version 5.1 Software version 5.1 of SIPLACE Traceability supports the SIPLACE X - s eries, X- series S, SX - series , DX …
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
33
6 SIPLACE Software Environment
6.1 SIPLACE Pro Programming System Version 13.1
The SIPLACE Pro programming system version 13.1 supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines with the 709.1 station
software version.
Compatible mode: SIPLACE Pro 12.x
NOTICE
For a detailed description of the programming system, see the SIPLACE Pro version
description and the online help system.
6.2 SIPLACE OIS Version 13.1
Software version 13.1 of the monitoring system SIPLACE OIS supports the SIPLACE X-series,
X-series S, SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: SIPLACE OIS 12.x
NOTICE
A detailed description can be found in the software description "Getting started with OIS"
and the online help system for OIS.
6.3 SIPLACE Setup Center Version 8.1
Software version 8.1 of the SIPLACE Setup Center supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: SIPLACE Setup Center 7.x
NOTICE
A detailed description can be found in the software description "Getting started with
Setup Center" and the online help system for Setup Center.
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
34
6.4 SIPLACE Traceability Version 5.1
Software version 5.1 of SIPLACE Traceability supports the SIPLACE X-series, X-series S,
SX-series, DX-series, CA-series and TX-series placement machines.
Compatible mode: SIPLACE Traceability 4.x
NOTICE
A detailed description can be found in the "Traceability User Guide".
Station Software 709.1 / Version Description Ausgabe 05/2016 Edition
35
7 Restrictions
X-Feeder
Because of the mirrored gantry configuration, the number of the available tracks on gantry 2 and 4
on the X4i, X4i S, SX4 and DX4 placement machines are restricted, not all of the tracks can be
reached by the placement heads. Feeders set on non-reachable tracks are deactivated
automatically.
Number of nozzle changer magazines
Because of the mirrored gantry configuration, the number of configurable nozzle changer
magazines on gantry 2 and 4 on the X4i, SX4 and DX4 placement machines is limited to 4
magazines.
Fiducial patterns
Asymmetric fiducial patterns (e.g. triangles) can currently only be used if the board is processed at
an orientation of 0° in the machine.
X-table
An additional table fiducial is necessary for the gantries 2 and 4 on the X4i and SX4 placement
machines.
Twin Head/HFH
– Twin Head/HFH are not supported on the X4i and DX4 placement machines.
– Not vacuum pump compatible.
– Not all pickup, dip and placement positions are accessible for both segments on the SX1/SX2
and SX4 placement machines.
CPP placement head
– Restrictions for the X2, X3, X4, X4i and SX4 placement machines can be found in the
correspondent User Guides to the X-series and in the Version Description to SIPLACE Pro.
– Not vacuum pump compatible.
– Not supported on DX series placement machines.
VHF P&P placement head
Supported on the SX1/SX2 V2 placement machine only.
Reduced air consumption with vacuum pump
No support for Twin Head and CPP placement heads.
Automatic tray feeding
The function is not supported on the X4i, SX4 and DX4 placement machines.