Micron Machine Settings Issue 3 LoRes.pdf - 第8页
Descriptions for the symbols used in this guide are given below: KEY Highlights the relevant danger to personnel. Details where the respective dimensions/forces are taken. W ARNING 4 1 5 2 6 3 Reference to the T echnical…
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE VICINITY OF THE
CAMERA LINEAR MOTORS THAT MAY ACT UPON FERROUS OBJECTS WHOSE MOVEMENTS
COULD LEAD TO PERSONAL INJURY AND/OR DAMAGE TO THE MACHINE.
3
SAFETY
Descriptions for the symbols used in this guide are given below:
KEY
Highlights the relevant danger to personnel.
Details where the respective dimensions/forces are taken.
WARNING
4
1
5
2
63
Reference to the Technical Reference manual.
Recommended handy tips.
4
41 52 63
Rail Location Jig 199140
RTC 187652
Check the gap between the belt support
plate and the main rail, as close as
possible to the linear guides.
Check the gap between the alignment pin
and the linear bearing. If the gap is less
than 0.25mm, adjustment is unnecessary.
Prior to carrying out this procedure
ensure the Front Rail Parallelism check
is carried out.
Camera System Module
Setting A
0.25mm
View on Front of Camera Carriage
Camera Alignment Pins (2 positions)
Camera Alignment Pins
Shim 0.25 mm
Shim
Linear Bearing
Camera X Axis
Support Platform
B
A
View on Arrow B
BOARD CLAMPS
WARNING
5
CAMERA
X Axis Parallelism - 1 Rotary Motors