Micron Machine Settings Issue 3 LoRes.pdf - 第9页
4 1 5 2 6 3 Rail Location Jig 199140 RTC 187652 Check the gap between the belt support plate and the main rail, as close as possible to the linear guides. Check the gap between the alignment pin and the linear bearing. I…
Descriptions for the symbols used in this guide are given below:
KEY
Highlights the relevant danger to personnel.
Details where the respective dimensions/forces are taken.
WARNING
4
1
5
2
63
Reference to the Technical Reference manual.
Recommended handy tips.
4
41 52 63
Rail Location Jig 199140
RTC 187652
Check the gap between the belt support
plate and the main rail, as close as
possible to the linear guides.
Check the gap between the alignment pin
and the linear bearing. If the gap is less
than 0.25mm, adjustment is unnecessary.
Prior to carrying out this procedure
ensure the Front Rail Parallelism check
is carried out.
Camera System Module
Setting A
0.25mm
View on Front of Camera Carriage
Camera Alignment Pins (2 positions)
Camera Alignment Pins
Shim 0.25 mm
Shim
Linear Bearing
Camera X Axis
Support Platform
B
A
View on Arrow B
BOARD CLAMPS
WARNING
5
CAMERA
X Axis Parallelism - 1 Rotary Motors
CAMERA
X Axis Parallelism - 2 Rotary Motors
Setting
Camera System Module
WARNING
Using a soft headed mallet gently tap the edge of the camera X
axis support plate to close the gap on the camera alignment pins
Camera X Motor Camera Y Motor
View From Beneath Camera Carriage
Securing Screws
41 52 63
6