TUT-CP842-Oper guide-preliminary.pdf.pdf - 第7页
About This Manual Manual Structure This manual has been created to familiarize the operator with standard operating procedures. The procedures included are split into several steps, each of which should be read and then …
Notes
Table of Contents
Preliminary
iv CP-842E/842ME Operator’s Guide
About This Manual
Manual Structure
This manual has been created to familiarize the operator with standard operating procedures. The
procedures included are split into several steps, each of which should be read and then carried out
at the machine. The manual itself is also split into several chapters, and after an initial
introduction to the machine, the order of the chapters is designed to roughly reflect the order in
which the machine will be operated during actual production. For a more detailed explanation of
machine operation and workings, refer to the CP-842E/842ME System Reference or
CP-842E/842ME Mechanical Reference manuals.
Chapter 1: Machine Configuration
This chapter provides illustrations and basic introductions to each of the major components of the
machine.
Chapter 2: Starting and Stopping the Machine
This chapter explains how to start and stop the machine, and select the various operation modes.
Chapter 3: Preparing for Production
This chapter explains how to select a production program, set the production quantity, and
perform other operations necessary to ready the machine for production.
Chapter 4 Starting Production
This chapter explains how to ready and check the nozzles, load a panel, and then commence
operation.
Chapter 5: Stopping the Machine
This chapter describes the various ways in which the machine can be stopped.
Chapter 6: Finishing Production
This chapter describes the procedure for stopping automatically upon completion of the scheduled
lot or the current panel.
Chapter 7: Maintenance
Routine maintenance procedures are detailed in this chapter.
Chapter 8: Production Support Functions
Several other procedures that may be performed during operation are detailed in this chapter.
About This Manual
Preliminary
1CP-842E/842ME Operator’s Guide
Notation Conventions Used in This Manual
The notation conventions employed in this manual are described below.
General notation
Notation sample Explanation
POWER ON, EMERGENCY STOP Buttons or switches on the machine are written as they
display at the machine.
[AUTO], [STEP] Machine commands are enclosed by square brackets.
About Symbols
To avoid injury to persons and damage to the machine, Fuji employs a number of messages and
symbols that are used in manuals and on the machines. Be sure you understand the meanings of
these symbols before reading the manual.
Hazard warnings are divided into the following three classes:
Notation sample Explanation
DANGER The hazard or unsafe practice will cause severe injury
or death.
WARNING The hazard or unsafe practice may cause severe injury
or death.
CAUTION The hazard or unsafe practice may lead to personal
injury or damage to the machine.
About This Manual
Preliminary
2 CP-842E/842ME Operator’s Guide