TUT-CP842-Oper guide-preliminary.pdf.pdf - 第90页

Notes Chapter 8: Production Support Functions Preliminary 8-14 CP-842E/842ME Operator ’s Guide

This function makes it possible to intentionally skip nozzles that are severely

bent, nozzles that are having difficulty placing parts because of a dirty back-

ground disk, or nozzles that for whatever reason you do not want to use.

Procedure

1. Select [Nozzle Skip] from the [Mode] section at the [Main]

screen.

2. Select the nozzle that is to be skipped.

The display for the nozzle being skipped will change to [MS].

Note: All nozzles cannot be displayed on the screen at one time. Use the up and

down arrow keys to display the nozzles that do not appear on the screen.

Select the nozzle again to clear the skip setting and return the display to

[OK].

Select [Close].

4. Select [Production] to start production and the skipped nozzle

will not be used in production.

8.17 Nozzle Skip

Chapter 8: Production Support Functions

Preliminary

8-13CP-842E/842ME Operator’s Guide

Notes

Chapter 8: Production Support Functions

Preliminary

8-14 CP-842E/842ME Operator’s Guide

CP-842E/842ME Operator’s Guide

Edition Date Manual Management Number

Preliminary March 31, 2004

FUJI Manufacturing Co., Ltd.

SMT Equipment

19 Chausuyama, Yamamachi, Chiryu,

Aichi Prefecture, 472-8686 Japan

Printed in Japan