00195613-01 IM Uptime LT_EN_DE.pdf - 第53页
Installation of WINDOWS XP Operating System Windows XP Professional License Installation SIPLACE Uptime LT Installationsanleitung / Installation Manual 53 2.3.6 Windows XP Pr ofessional License In the followin g setup st…
Installation of WINDOWS XP Operating System
Installation Determining the SIPLACE Installation Types
52 SIPLACE Uptime LT Installationsanleitung / Installation Manual
2.3.4 Determining the SIPLACE Installation Types
With the help of this input, the system is able to decide for which SIPLACE product the Windows XP
Professional installation is to be performed.
X Select SIPLACE Pro Client.
X Click on the Next button.
2.3.5 Checking the Hardware Requirements.
A hardware check is performed with different threshold values. If these thresholds are not adhered to,
an error message will be issued. However, the installation procedure will not be stopped.
Please observe the minimum hardware system requirements in chapter" General Information About the
Software Installation".
X Click on the Next button.
Installation of WINDOWS XP Operating System
Windows XP Professional License Installation
SIPLACE Uptime LT Installationsanleitung / Installation Manual
53
2.3.6 Windows XP Professional License
In the following setup steps, all the parameters required for the installation and configuration of Windows
XP Professional will be queried and saved, as this is a special version of Windows XP, designed for
Siemens AG.
X Enter your user name (not the administrator name).
X Enter your company name.
X Click on the Next button.
Installation of WINDOWS XP Operating System
Installation Windows XP Network Settings
54 SIPLACE Uptime LT Installationsanleitung / Installation Manual
2.3.7 Windows XP Network Settings
In this dialog, the basic network parameters are set for a computer which is to work with a SIPLACE
product. The following data is required for this:
Workgroup name: SIPLACE
This name can be changed as required, except on the station computer.
IP address: free choice
The computer should only used addresses from the private address range (172.x.x.x)
IP address gateway: free choice
SubNet mask: free choice
Please use the standard value for the UPTIME LT computer.
System name: must be uniquely defined in the network.
X Enter the relevant data.
X Click on the Next button.
WARNING: System name
If the system name chosen is already present in the network, a randomly generated name will
be used by the system.