00196284_Install_WinXP_unattended_DVD.pdf - 第52页

Windows XP Unattended Setup DVD V4 .2 11/2015 Edition 52 1. Hard Disk C onfiguration To c hange the def ault partit ion conf iguration of the first harddis k, click on the butto n Configure of the option Harddisk Configu…

Windows XP Unattended Setup DVD V4.2 11/2015 Edition

Fig. 8 User Configuration

→ Enter the user name.

→ Enter the company name.

→ Click the Next button to continue.

4.2.9 Hardware Configuration

The following dialog is displayed:

Fig. 9 Hardware Configuration

If you want to change the configuration of an option, click on the Configure button.

If you selected Station Computer to configure a touch screen please see chapter 4.2.10 for details.

If you want to reset the configuration, click on the Reset button.

The Harddisk Configuration is not available if you selected the station data backup option, please see

chapter 4.2.7 “Backup and Restore for existing station configuration data”).

→ Click the Next button, if you have finished the configuration.

Windows XP Unattended Setup DVD V4.2 11/2015 Edition

1. Hard Disk Configuration

To change the default partition configuration of the first harddisk, click on the button Configure of the

option Harddisk Configuration (see Chapter 4.2.9 Hardware Configuration).

Fig. 10 Hard Disk Configuration

Your settings are displayed in the graphical view.

→ Enter the size of the first partition in the field Size. You can change the value by using the “+/-” button or

enter the value directly.

→ If you want to use the whole disk with only one partition, click on the Whole Disk button.

→ Click the OK button to apply your changes.

→ If you want to reset the default settings, click the Reset button.

→ If you want to cancel configuration and return to the main page, click the Cancel button.

2. Network Configuration

To change the default network configuration, click on the button Configure of the option Network

Configuration (see Chapter 4.2.9Hardware Configuration).

Windows XP Unattended Setup DVD V4.2 11/2015 Edition

Fig. 11 Network Configuration

→ Enter the host name of your computer.

→ Enter the workgroup name.

→ Select the connection you want to configure.

→ Enter the IP address for the selected connection.

→ Enter the subnet mask for the selected connection.

→ Enter the default gateway for the selected connection.

→ If you want to extend the current hostname with the last two values of the IP address of the selected

connection, click on the button Build Hostname from IP

→ Click the OK button to apply your changes.

→ If you want to reset the default settings, click the Reset button.

3. Hosts Configuration

To change the entries of the hosts file, click on the button Configure of the option Hosts Configuration

(see Chapter 4.2.9 Hardware Configuration).

Fig. 12 Hosts Configuration

→ Select the entry you want to change.

→ If you want to add a new entry, click the New entry button.