00196284_Install_WinXP_unattended_DVD.pdf - 第58页
Windows XP Unattended Setup DVD V4 .2 11/2015 Edition 58 4.3 Standar d Settings and Fi nal Administ ration Defaul t settings Screen res olution: 1 024 x 7 86, 24 - bit (16 mill.) C olors , 60 Hz Refr esh Frequenc y Tim e…
Windows XP Unattended Setup DVD V4.2 11/2015 Edition
57
Fig. 17 Warning message
→ To continue erasing the first harddisk and starting the installation, click the Yes button.
→ To abort the procedure, click the No button.
Windows XP Unattended Setup DVD V4.2 11/2015 Edition
58
4.3 Standard Settings and Final Administration
Default settings
Screen resolution: 1024 x 786, 24-bit (16 mill.) Colors, 60 Hz Refresh Frequency
Time Zone: GMT (London, Edinburgh, Lisbon)
Network Protocol: TCP/IP
In addition to the default user groups of Windows XP, the following users and user groups are configured:
Note:
For further information on passwords of created accounts, please refer to technical information
TI2008-04V08 for service technicians.
Station Computer
User: Operator, Siemens-Techniker (Siemens Technician), Einrichter (Engineer)
User groups: _Operator, _Einrichter, _Siemens-Techniker
Vision Computer
User: Operator, Siemens-Techniker, Einrichter, VisionDCOM
User groups: _Operator, _Einrichter, _Siemens-Techniker
Line Computer basic
User: Siemens, plr or Siplace (depending on password complexity setting), SIPLACEServices,
SIPLACEAdmin
Note:
If the computer you have installed is equipped with a CRT (cathode ray tube), please set the
refresh frequency to a higher value. The default value of 60 Hz is preset for TFT displays.
Windows XP Unattended Setup DVD V4.2 11/2015 Edition
59
Passwords
Station Computer
Administrator
After the unattended setup, the default password for the local administrator is MS128. Please assign a new
password for your administrator!
Operator
The default user „Operator“ has the default password “operator”. Please do not change the password.
Otherwise the automatic logon is not possible.
Engineer
The user „Einrichter“ will be used for further options. The default password is “einrichter”. This user
doesn’t have further rights!
Siemens- Technician
The user „Siemens-Techniker“ will be used by SIPLACE service. The SIPLACE Service Personnel knows
the password. Don’t change the password!
Administrator Group
The user „ Siemens-Techniker“ is in the local administrator group. Don’t remove this user from the group.
Otherwise the Support Personnel can’t perform any maintenance.
Other settings
The passwords never expire!
Vision Computer
Administrator
After the unattended setup, the default password for the local administrator is MS128. Please assign a new
password for your administrator!
Operator
The default user „Operator“ has the default password “operator”.
Engineer
The user „Einrichter“ will be used for further options. The default password is “einrichter”. This user
doesn’t have further rights and is disabled!
Siemens- Technician