_414214_AVK3 服务手册.pdf - 第113页
6 . 8 Secret Screen Service Functions (CONFIDENTIAL) SERVICE MANUAL A VK3 6.8−4 D77SEC−85−080−A0 6.8.4 Initial Data Set 1. Select “MANU” → ”REQUEST” → “F8” → “F1” (MACHINE INITIALIZE V ALUE SETTING) → “F3” (PRUODUCTION C…
6.8 Secret Screen Service Functions (CONFIDENTIAL)
SERVICE MANUAL
AVK3
6.8−3
D77SEC−85−080−A0
6.8.3 Initial Data Clear
1. Select “MANU” → ”REQUEST” → “F8” → “F1” (MACHINE INITIALIZE VALUE SETTING) →
“F3” (PRUODUCTION CONDITIONS SETTING) → “F2” (CLEAR MEMORY) → “F7” → “A”
→ “F7” → “J” → “F7” → “F2” (INITIAL DATA CLEAR) on the main control panel.
<F1> <F2> <F3> <F4> <F5> <F6> <F7> <F8>
YYYY − MM − DD HH : MM
THIS IS TO CLEAR INITIAL DATA.
MANUAL : 1 BLOCK << M/C INI. VAL. SET >>
RETURN
TO DISP
CLEAR INITIAL DATA.
INITIAL DATA CLEAR
INITIALIZATION ATTEMPT? ( F1 : YES F2 : NO )
YES NO
Figure 6.8−2:Initial Data Clear
Description of parameters
• This is a designation of whether all initial data will be initialized or not.
F1 : All initial data will be initialized.
F2 : All initial data will not be initialized.
6.8 Secret Screen Service Functions (CONFIDENTIAL)
SERVICE MANUAL
AVK3
6.8−4
D77SEC−85−080−A0
6.8.4 Initial Data Set
1. Select “MANU” → ”REQUEST” → “F8” → “F1” (MACHINE INITIALIZE VALUE SETTING) →
“F3” (PRUODUCTION CONDITIONS SETTING) → “F2” (CLEAR MEMORY) → “F7” → “A”
→ “F7” → “J” → “F7” → “F3” (INITIAL DATA SET) on the main control panel.
<F1> <F2> <F3> <F4> <F5> <F6> <F7> <F8>
YYYY − MM − DD HH : MM
THIS IS TO SET INITIAL DATA.
MANUAL : 1 BLOCK << M/C INI. VAL. SET >>
RETURN
TO DISP
SET INITIAL DATA.
INITIAL DATA SET
SETTING ATTEMPT? ( F1 : YES F2 : NO )
YES NO
Figure 6.8−3:Initial Data Set
Description of parameters
• This is a designation of whether all initial data will be set or not.
F1 : All initial data will be set.
F2 : All initial data will not be set.
6.8 Secret Screen Service Functions (CONFIDENTIAL)
SERVICE MANUAL
AVK3
6.8−5
D77SEC−85−080−A0
6.8.5 NC Axis Used / Unused Setting
1. Select “MANU” → ”REQUEST” → “F8” → “F1” (MACHINE INITIALIZE VALUE SETTING) →
“F3” (PRUODUCTION CONDITIONS SETTING) → “F5” → “A” → “X” → “I” → “S” → “F5”
on the main control panel.
<F1> <F2> <F3> <F4> <F5> <F6> <F7> <F8>
YYYY − MM − DD HH : MM
MOVE CURSOR. PUSH ENTER KEY.
MANUAL : 1 BLOCK << M/C INI. VAL. SET >>
RETURN
TO DISP
NC AXIS USED / UNUSED SETTING
（X AXIS） 1:YES 2:NO
（Y AXIS） 1:YES 2:NO
（ZL AXIS） 1:YES 2:NO
（ZR AXIS） 1:YES 2:NO
（T AXIS） 1:YES 2:NO
（U AXIS） 1:YES 2:NO
（H AXIS） 1:YES 2:NO
（θH AXIS） 1:YES 2:NO
（θA AXIS） 1:YES 2:NO
（WH AXIS） 1:YES 2:NO
（WA AXIS） 1:YES 2:NO
（V AXIS） 1:YES 2:NO
Figure 6.8−4:NC Axis Used / Unused Setting
Description of parameters
• This is a designation of whether each NC axis will be used or Unused.
1 : Used
2 : Unused