_414214_AVK3 服务手册.pdf - 第14页
SERVICE MANUAL A VK3 SAFETY−9 D77SEC−03−020−A0 Never place hands and fingers inside the machine during operation. Machine could catch hands and fingers and cause personal injury . When in AUTO mode and the machine stops …
SERVICE MANUAL
AVK3
SAFETY−8
D77SEC−03−020−A0
As a general rule, only ONE operator
should handle the controls.
To avoid accidents, when two
or more operators are involved
in machine operation, use
hand signals.
Always shut OFF the machine
power switch before performing
maintenance.
Improper machine operation
could cause personal injury.
Only one operator should be involved when
operating controls or, turning air pressure
ON or OFF.
When two or more operators are involved in
machine operation, use hand signals, etc.
to make sure that all operators are aware of
the machine’s operation status.
Don’t Forget to Signal!
If it is possible to perform maintenance
without machine operation, turn the power
OFF to ensure safety.
Power OFF!
WARNING WARNING
SERVICE MANUAL
AVK3
SAFETY−9
D77SEC−03−020−A0
Never place hands and fingers inside
the machine during operation.
Machine could catch hands and
fingers and cause personal injury.
When in AUTO mode and the machine
stops for an error during operation, depend-
ing on the circumstances, machine opera-
tion may restart automatically after the
cause of the error is removed. Therefore,
never place hands in the machine when it is
in the AUTO mode. For example, when the
P.C.B. detector detects an existing P.C.B.,
the machine stops during operation. The
machine will restart automatically as soon
as a P.C.B. enters.
No Hands in Machine
P.C.B. detector
Keep body
clear
WARNING
Turn OFF the switches on the sub
control panel after performing
maintenance.
The machine will move when
changing operation modes and
may cause personal injury.
If the switches are turned ON during operation,
be sure to turn them OFF after completing your
objective.
Turn Switches OFF!
CAUTION
SERVICE MANUAL
AVK3
SAFETY−10
D77SEC−03−020−A0
Never touch sensors directly.
Machine can catch hands and
fingers and cause personal injury.
Never touch sensors directly with hands.
Instead, use a piece of paper, tweezers, etc.
Don’t Touch Sensors Directly!
Keep body
clear
CAUTION
Beware of high temperature
when replacing light bulbs.
Handling a hot light bulb may
cause a burn.
Beware of high temperature when replacing
light bulbs.
Handling a hot light bulb may cause a
burn.
Burn
Burn
CAUTION