Horizon UserManualV6.pdf - 第144页
Frame Rear This parameter sets the distance between the outer edge of the screen frame or adaptor and the inner edge of the frame, at the rear of the frame. Minimum 20mm Maximum Screen Length - 250mm Increment 0.1mm Defa…
To enable screen library files carry out the following:
1. Highlight Screen Size in the Set Prefs page.
2. Using Incr. or Decr. select Screen Library.
Edit Data is now available on the menu bar.
3. Select Edit Data, the following window and menu bar is displayed:
Next Previous Incr. Decr. Exit
Use Incr. or Decr. to select the required Screen Type. If no valid screen library
files are found, the default file DEK 265 Central Image is displayed.
Use the Next or Previous to select and Incr. or Decr. to modify the screen frame
parameters as required.
The screen library menu parameters are defined in the table below:
Parameter Definition
Screen Record ID The identity of the screen type library record containing a text string that
matches the Screen Type selected.
Format Maximum 32 character text string
Default DEK 265 Central Image
Screen Length This parameter sets overall dimension front to rear of the screen frame or
adaptor.
Minimum 550mm
Maximum 860mm
Increment 0.1mm
Default 736.6mm
Screen Width This parameter sets the overall dimension left to right of the screen frame or
adaptor.
Minimum 580mm
Maximum 736.6mm
Increment 0.1mm
Default 736.6mm
Frame Front This parameter sets the distance between the outer edge of the screen frame
or adaptor and the inner edge of the frame, at the front of the frame.
Minimum 20mm
Maximum Screen Length - 250mm
Increment 0.1
Default 38.1mm
Software Version 6 User Manual 2.9
SET PREFERENCES
PREFERENCES
SCREEN TYPE
SCREEN LENGTH
SCREEN WIDTH
FRAME FRONT
FRAME REAR
FRAME LEFT
FRAME RIGHT
DEK 265 CENTRAL IMAGE
XXX
XXX
XXX
XXX
XXX
XXX
mm
mm
mm
mm
mm
mm
Screen Frame Configuration
Frame Rear This parameter sets the distance between the outer edge of the screen frame
or adaptor and the inner edge of the frame, at the rear of the frame.
Minimum 20mm
Maximum Screen Length - 250mm
Increment 0.1mm
Default 38.1mm
Frame Left This parameter sets the distance between the outer edge of the screen frame
or adaptor and the inner edge of the frame, at the left of the frame.
Minimum 20mm
Maximum Screen Length - 250mm
Increment 0.1mm
Default 38.1mm
Frame Right This parameter sets the distance between the outer edge of the screen frame
or adaptor and the inner edge of the frame, at the right of the frame.
Minimum 20mm
Maximum Screen Length - 250mm
Increment 0.1mm
Default 38.1mm
Consumable Action Sets how the machine reacts to a cleaner paper low, cleaner solvent low, print
medium low or Vortex cleaning cassette expired, options are:
Warn; Pause; Suspend
Warn - A warning window is displayed, but printing proceeds without
interruption. The tricoloured beacon shows amber/green.
Pause - A pause on warning window is displayed and printing is delayed to
enable the user to either; replenish the consumable resource, or defer the
replenishment until later and continue printing. The tricoloured beacon shows
red.
Suspend - A suspend on warning window is displayed and printing is suspended
and remains suspended, until the consumable resource has been replenished.
The tricoloured beacon shows red. Before printing commences the consumable
resources are checked for availability, before allowing the print run to proceed.
Image Recording Sets whether video images can be recorded, options are:
Off; PC Disk; VP Disk
The default is Off.
PCdisk requires the PC to have 8Mb ram & VPdisk requires a SCSI disk to be
attached to the VP.
Under Screen
Cleaner
Sets whether or not the vacuum option is fitted to the machine, options are:
Vacuum; Standard
The default is Standard.
If standard is selected the vacuum options are removed from the screen clean
mode parameters. If Vortex under screen cleaner is fitted, vacuum is the only
option.
To enable the blue under screen cleaner carry out the following:
2.10 User Manual Software Version 6
SET PREFERENCES
PREFERENCES
1. Press the function key F10 on the keyboard, the following window is
displayed:
NOTE
If the Vortex under screen cleaner is currently enabled, carry out disabling the
Vortex under screen cleaner.
2. Type bluon using the keyboard.
3. Press Enter, the message ‘Blue Under-Screen Cleaner Enabled’ is
displayed in the message prompt bar.
4. Press Exit.
To disable the blue under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, a window of the following form
is displayed:
2. Type bluoff using the keyboard.
3. Press Enter, the message ‘Blue Under-Screen Cleaner Disabled’ is
displayed in the message prompt bar.
The silver under screen cleaner becomes the current cleaner and all cleaner
parameters revert to being appropriate to the previous cleaner.
The value of the configuration parameter cleaner type is set to silver and this
parameter is written to the configuration file.
4. Press Exit.
To enable the Vortex under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, a window of the following form
is displayed:
Software Version 6 User Manual 2.11
SET PREFERENCES
PREFERENCES
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
201305
March 19 2000
10:57:38
RR0400.EXE
05.00
SBNG
265 H
O
RIZ
O
N
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
201305
March 19 2000
10:57:38
RR0400.EXE
05.00
SBNG
265 H
O
RIZ
O
N