Horizon UserManualV6.pdf - 第202页
Board at Stop This diagnostic function continuously displays the status of the board at stop sensor. Board at Left This diagnostic function continuously displays the status of the left board sensor. On is displayed if a …
Home Rail Width Selecting this diagnostic function drives the rail width motor to its home position
as determined by its home sensor.
Drive Rail to Board
Width
Selecting this diagnostic function drives the rail width motor to the width set by
the board width parameter.
Drive Rail Width
Using Two Button
Control
Selecting this diagnostic function drives the rail width motor using the jog
buttons. The right jog button drives the rail width motor forward at slow speed
and the left jog button drives it to the rear, stopping immediately the button is
released.
Drive Belts Using
Two Button Control
Selecting this diagnostic function drives the belt motors using the jog buttons.
The right Jog button drives the belt motors to the right and the left Jog button
drives the belt motors to the left, stopping immediately the button is released.
Belt Speed
Calibration
Selecting this diagnostic function enables the belt speed calibration to be carried
out. For information on the belt speed calibration procedure see the Technical
Reference Manual, Rail System Chapter.
Toggle Board
Clamp
Selecting this diagnostic function alternately energizes and de-energizes the
board clamp, displaying On when energized and Off when de-energized.
Toggle Board Stop Selecting this diagnostic function alternately lowers and raises the board stop
housed in the camera assembly, displaying On when lowered and Off when
raised.
Cycle Board on
Belts
Selecting this diagnostic function starts a continuous cycle of driving the belts to
the right, until a board reaches the right board sensor, dwelling for 2 seconds and
driving the belts to the left, until a board reaches the left board sensor, dwelling
for 2 seconds and repeating the cycle, until stop is pressed or the set cycle count
is reached.
Cycle Board Clamp Selecting this diagnostic function starts a continuous cycle of clamping and
unclamping the board clamps. ‘Cycling Clamps....’ is displayed in the message
prompt box.
Cycle Rails Selecting this diagnostic function drives the moveable rail from the home
position to the minimum board width and back to the home position. ‘Cycling
Rails....’ is displayed in the message prompt box.
Board Stop in
Position
This diagnostic function continuously displays the status of the board stop
lowered sensor.
Software Version 6 User Manual 5.19
DIAGNOSTICS
RAIL SYSTEM
Board at Stop This diagnostic function continuously displays the status of the board at stop
sensor.
Board at Left This diagnostic function continuously displays the status of the left board sensor.
On is displayed if a board is detected on the rails at the left of the machine.
Board at Right This diagnostic function continuously displays the status of the right board
sensor. On is displayed if a board is detected on the rails at the right of the
machine.
Cycle Count This diagnostic function displays the amount of cycles done and the amount of
cycles to go to complete the cycle count.
5.20 User Manual Software Version 6
DIAGNOSTICS
RAIL SYSTEM
PASTE DISPENSE SYSTEM
Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Run
Diagnost
Next Previous Exit
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Carriage Home Selecting this diagnostic function drives the paste dispense carriage left to its
home position, as determined by its home sensor.
Drive Carriage to
Start Position
Selecting this diagnostic function drives the paste dispense carriage to the
position set by the paste start parameter.
Drive Carriage to
End Position
Selecting this diagnostic function drives the paste dispense carriage to the
position set by the paste stop parameter.
Drive Cartridge
Down
Selecting this diagnostic function drives the cartridge tilt motor down until the
cartridge away (down) sensor is detected.
Drive Cartridge Up Selecting this diagnostic function drives the cartridge tilt motor up until the
cartridge home (up) sensor is detected.
Toggle Paste
Dispense
Selecting this diagnostic function alternately applies and removes the air
pressure to the paste dispense cartridge, displaying On when air pressure is
applied and Off when air pressure is removed.
Software Version 6 User Manual 5.21
DIAGNOSTICS
PASTE DISPENSE SYSTEM
Paste Cartridge Empty
Cartridge in Down Position
Cartridge in Up Position
ON
ON
OFF
OFF
Carriage Home
Drive Carriage To Start Position
Drive Carriage To End Position
Drive Cartridge Down
Drive Cartridge Up
Toggle Paste Dispense
Paste D
i
spense System D
i
agnost
i
cs