Horizon UserManualV6.pdf - 第204页

Paste Cartridge Empty This diagnostic function continuously displays the status of the cartridge empty sensor. Cartridge in Down Position This diagnostic function continuously displays the status of the cartridge away (d…

100%1 / 378
PASTE DISPENSE SYSTEM
Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Run
Diagnost
Next Previous Exit
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Carriage Home Selecting this diagnostic function drives the paste dispense carriage left to its
home position, as determined by its home sensor.
Drive Carriage to
Start Position
Selecting this diagnostic function drives the paste dispense carriage to the
position set by the paste start parameter.
Drive Carriage to
End Position
Selecting this diagnostic function drives the paste dispense carriage to the
position set by the paste stop parameter.
Drive Cartridge
Down
Selecting this diagnostic function drives the cartridge tilt motor down until the
cartridge away (down) sensor is detected.
Drive Cartridge Up Selecting this diagnostic function drives the cartridge tilt motor up until the
cartridge home (up) sensor is detected.
Toggle Paste
Dispense
Selecting this diagnostic function alternately applies and removes the air
pressure to the paste dispense cartridge, displaying On when air pressure is
applied and Off when air pressure is removed.
Software Version 6 User Manual 5.21
DIAGNOSTICS
PASTE DISPENSE SYSTEM
Paste Cartridge Empty
Cartridge in Down Position
Cartridge in Up Position
ON
ON
OFF
OFF
Carriage Home
Drive Carriage To Start Position
Drive Carriage To End Position
Drive Cartridge Down
Drive Cartridge Up
Toggle Paste Dispense
Paste D
i
spense System D
i
agnost
i
cs
Paste Cartridge
Empty
This diagnostic function continuously displays the status of the cartridge empty
sensor.
Cartridge in Down
Position
This diagnostic function continuously displays the status of the cartridge away
(down) sensor.
Cartridge in Up
Position
This diagnostic function continuously displays the status of the cartridge home
(up) sensor.
5.22 User Manual Software Version 6
DIAGNOSTICS
PASTE DISPENSE SYSTEM
SCREEN ALIGNMENT
Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Run
Diagnost
Adjust Next Previous Exit
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Next Previous Incr. Decr. Exit
Next / Previous keys have no function in this application.
Incr. / Decr. keys change the value of the cycle count.
Exit returns operation to the screen alignment diagnostics page.
Home Actuators Selecting this diagnostic function drives the X forward, X Rear and Y Axis
actuators simultaneously to their home positions, as determined by their home
sensors.
Drive X Forward
Motor Using
Jog Buttons
Selecting this diagnostic function drives the X forward actuator using the jog
buttons. The right Jog button to drive the X forward actuator right at slow speed
and the left Jog button drives it left, stopping immediately the button is released.
Software Version 6 User Manual 5.23
DIAGNOSTICS
SCREEN ALIGNMENT
Cycle Count
Done :-
0, To go :-
50
ON
Home Actuators
Drive X Forward Motor Using Jog Buttons
Drive X Rear Motor Using Jog Buttons
Drive Y Motor Using Jog Buttons
Toggle Chase Clamp
Cycle Alignment System
Screen A
li
gnment D
i
agnost
i
cs
Actuator Cycle Test Parameters
CYCLE COUNT
50.0
Cycles