Horizon UserManualV6.pdf - 第265页

3. Use the Left, Right, Up and Down keys to highlight a product file. If the product to be setup is a new one, select an existing product file and modify it. Load Rebuild List Left Right Up Down Exit 4. Select Load . The…

2Di SETUP

Preparation For 2Di inspection functionality the machine requires 2D Inspection to be set to

enabled.

Set Preferences 1. Select Maint.

Run Open

Cover

Paste

Load

Clean

Screen

Adjust Setup Monitor

Maint.

2. Select Set Prefs.

Calibrat

Pressure

Calibrat

Offset

Calibrat

Vision

House

Keeping

Set

Prefs

Diagnost Test

Cycles

Exit

3. Set 2D inspection to enabled using the Next and Incr. keys.

Incr.

Decr. Exit

4. Ensure under screen cleaner function selected, ie Vacuum or Standard.

5. Select Exit. The message ‘Printer configuration data file saved’ is

displayed in the message prompt bar above the menu bar.

Next Previous Incr. Decr.

Exit

6. Select Exit.

Calibrat

Pressure

Calibrat

Offset

Calibrat

Vision

House

Keeping

Set

Prefs

Diagnost Test

Cycles

Exit

Load Product File 1. Select Setup.

Run Open

Cover

Paste

Load

Clean

Screen

Adjust

Setup

Monitor Maint.

2. Select Load Data. The message ‘Use keyboard to action product search’

is displayed in the message prompt bar above the menu bar.

Mode

Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

8.14 User Manual Software Version 6

2Di INSPECTION

2Di SETUP

3. Use the Left, Right, Up and Down keys to highlight a product file. If the

product to be setup is a new one, select an existing product file and modify it.

Load Rebuild

List

Left Right Up Down

Exit

4. Select Load. The machine loads the product file and trains the fiducials.

Load

Rebuild

List

Left Right Up Down Exit

Edit Data 1. If the loaded product file is the correct one, go to Step 8. If the file needs to

be modified continue with Step 2.

2. Select Edit Data.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

The following window is displayed:

3. To change the product name; highlight product name using the Next and

Previous keys. Select Incr. type in required product name and press Enter

using the keyboard.

4. If the product name is changed the message ‘Do you also want to create a

copy of the inspection file ?’ is displayed. Select one of the following:

Yes Global

Only

Yes - All data is copied, including the site coordinates.

Global Only - The global parameters and limits are copied.

No - No inspection file is copied. Use when setting up an inspection file for the

first time.

Software Version 6 User Manual 8.15

2Di INSPECTION

2Di SETUP

Dek04

30 mm

24 mm/s

NONE

EDGE

DISABLED

101.5 mm

152.5 mm

1.6 mm

150 mm/s

20 mm/s

0.0 mm

PRODUCT NAME

PRODUCT ID

DWELL HEIGHT

DWELL SPEED

SCREEN ADAPTOR

SCREEN IMAGE

CUSTOM SCREEN

BOARD WIDTH

BOARD LENGTH

BOARD THICKNESS

PRINT SPEED

FLOOD SPEED

PRINT FRONT LIMIT

PRINT REAR LIMIT

Edit Current Process Parameters

..more

5. Using the Next, Previous, Incr. and Decr. keys, edit the current process

parameters for the new product.

Save

Next Previous Incr. Decr.

Exit

6. Press Save.

Save

Next Previous Incr. Decr. Exit

7. When the message ‘Board Data File Saved’ is displayed, press Exit.

Save Next Previous Incr. Decr.

Exit

8. Select Mode until Step appears in mode option of the printer status display.

Mode

Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

If the required screen is already in the printer go to Step 16.

If the screen needs to be changed continue with Step 9.

9. Select Change Screen.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

10. When the message ‘Open Front Cover and Remove Screen’ is displayed

lift the printhead cover.

11. Remove the screen from the printer.

12. Fit the new screen into the printer ensuring the correct orientation of the

screen.

13. Lower the printhead cover.

14. Press the System button on the control console.

15. Select Change Screen.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

16. Select Exit.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

8.16 User Manual Software Version 6

2Di INSPECTION

2Di SETUP